Related Manuals for Code Blue CB4 Series
Summary of Contents for Code Blue CB4 Series
- Page 1 CB4 Series Model: ENBS02, ENBS03, ENBS04, & ENBS05 Admin Guide Installation | Configuration | Support | Maintenance | Use 800.205.7186 • www.codeblue.com...
- Page 2 OF OR IN CONNECTIONS WITH THIS GUIDE, THE SOFTWARE OR OTHER INFORMATION CONTAINED HEREIN OR THE USE THEREOF. Code Blue Corporation reserves the right to make any modifications to this guide or the information contained herein at any time without notice. The software described herein may also be governed by the terms of a separate user license agreement.
-
Page 3: Table Of Contents
Multi-Tap Transformer (Power Brick) 110-347VAC (CB 4-u Only) S-1000 & S-1050 Beacon/Strobe Operation Power Requirements Locating Unit Serial Numbers Maintenance Schedule Warranty Download Information Legal & Regulatory Information Code Blue • 259 Hedcor Street • Holland, MI 49423 USA • 800.205.7186 •... -
Page 4: Introduction
CB 4 Series is our basic communication unit designed for wall or pole installations in interior and exterior applications. The all-steel housing and Code Blue’s speakerphone system meet the need for a highly vandal resistant unit, while providing a cost-effective and reliable solution. -
Page 5: Cb4 Model Photos
CB 4 Series Administrator Guide This guide contains all of the Code Blue CB 4 Series information for the 4-s, 4-u, 4-r. This guide contains a general overview of the CB 4 Series options and its application, installation and wiring. -
Page 6: Safety Information
In some countries, a certified electrician may be required. NOTICE When transporting a Code Blue product, use the original packaging or equivalent to prevent damage to the product. Code Blue products shall be used in compliance with local laws and regulations. -
Page 7: Installation Instructions
Important Notes: EIA/TIA, ANSI, CSA and BICSI cabling or similar standards shall be adhered to for proper operation of Code Blue communication devices connected to copper or fiber infrastructures communications cable and electrical cable in the same conduit is not an acceptable installation and shall not be supported. -
Page 8: Tools Required
Drill & Security Bit for removing & inserting security screws on phone & access plate. 3/8” Socket set & extension to mount unit onto wall Banding Tool if using Pole Mount kit Code Blue • 259 Hedcor Street • Holland, MI 49423 USA •... -
Page 9: Cb 4-S Installation Instructions
Connect the Phone Line (if required) - See phone installation instructions Apply Power - The enclosure should become operational immediately after the PoE Ethernet cable has been connected. See diagrams next page Code Blue • 259 Hedcor Street • Holland, MI 49423 USA •... - Page 10 DISCLAIMER: The dimensions above are intended as guidelines only. For specific installation requirements, reference your local codes. All wiring must be installed and connected by experienced and certified personnel to meet local and national electrical codes, and will include a service disconnect. Code Blue • 259 Hedcor Street •...
-
Page 11: Cb 4-S With Dual Faceplates Installation Instructions
Connect the Phone Line (if required) - See phone installation instructions Apply Power - The enclosure should become operational immediately after the PoE Ethernet cable has been connected. See diagrams next page Code Blue • 259 Hedcor Street • Holland, MI 49423 USA •... - Page 12 DISCLAIMER: The dimensions above are intended as guidelines only. For specific installation requirements, reference your local codes. All wiring must be installed and connected by experienced and certified personnel to meet local and national electrical codes, and will include a service disconnect. Code Blue • 259 Hedcor Street •...
-
Page 13: Cb 4-R Installation Instructions
Connect the Phone Line (if required) - See phone installation instructions Apply Power - The enclosure should become operational immediately after the PoE Ethernet cable has been connected. Code Blue • 259 Hedcor Street •... - Page 14 DISCLAIMER: The dimensions above are intended as guidelines only. For specific installation requirements, reference your local codes. All wiring must be installed and connected by experienced and certified personnel to meet local and national electrical codes, and will include a service disconnect. Code Blue • 259 Hedcor Street •...
-
Page 15: Cb 4-U Installation Instructions
See diagram and instructions on page 27 Connect the Phone Line (if required) - See phone installation instructions Apply Power - The enclosure should become operational immediately after the PoE Ethernet cable has been connected. Code Blue • 259 Hedcor Street •... - Page 16 CB 4 Series Administrator Guide Code Blue • 259 Hedcor Street • Holland, MI 49423 USA • 800.205.7186 • www.codeblue.com GU-160-W page 16 of 37...
-
Page 17: Power Requirements
4 1/8 REF 40-1/4 GROUND/FLOOR All wiring must be installed and connected by experienced and certified personnel to meet local and national electrical codes, and will include a service disconnect. Code Blue • 259 Hedcor Street • Holland, MI 49423 USA •... -
Page 18: Mounting Installation Instructions
Place a steel washer (E) on each of the four studs. Turn a nut (F) on each of the four studs. Banding tool sold separately. See Parts Order Form, part #41441. Code Blue • 259 Hedcor Street • Holland, MI 49423 USA •... -
Page 19: Cb 4 Series Curb Mount Installation
16 inches of wire coming out of the top of the curb mount to connect to the Code Blue phone. A 7/8 inch conduit hole in the back of the unit has been provided. - Page 20 CB 4 Series Administrator Guide Code Blue • 259 Hedcor Street • Holland, MI 49423 USA • 800.205.7186 • www.codeblue.com GU-160-W page 20 of 37...
-
Page 21: Wiring Diagrams
Earlier product production may have different components and wiring connections. Reference the model and serial number from the unit ID tag and contact manufacturer to confirm replacement part version and availability. Code Blue • 259 Hedcor Street •... -
Page 22: Poe Din Rail Power System | 48V Dc 12.96W Or 25.5W (Cb 4-U Only)
CB 4 Series Administrator Guide PoE DIN Rail Power System | 48V DC 12.96w or 25.5w (CB 4-u Only) Code Blue • 259 Hedcor Street • Holland, MI 49423 USA • 800.205.7186 • www.codeblue.com GU-160-W page 22 of 37... -
Page 23: Nightcharge® 120-240V Ac @ 3 Amps No Area Light | 12Vdc
CB 4 Series Administrator Guide NightCharge® 120-240V AC @ 3 Amps NO Area Light | 12VDC 10 Amps (CB 4-u Only) Code Blue • 259 Hedcor Street • Holland, MI 49423 USA • 800.205.7186 • www.codeblue.com GU-160-W page 23 of 37... -
Page 24: Poe - Non-Din Rail Power System 480V Dc 30 Watts Pse | 12.96W Or 25.5W Pd (Cb 4-R & Cb 4-S Only)
Product wiring diagram shown reasonably represents current offering and is intended to assist in component identification and service. Earlier product production may have different components and wiring connections. Reference the model and serial number from the unit ID tag and contact manufacturer to confirm replacement part version and availability. Code Blue • 259 Hedcor Street •... -
Page 25: Multi-Tap Transformer (Power Brick) 110-347Vac (Cb 4-U Only)
CB 4 Series Administrator Guide Multi-Tap Transformer (Power Brick) 110-347VAC (CB 4-u Only) Code Blue • 259 Hedcor Street • Holland, MI 49423 USA • 800.205.7186 • www.codeblue.com GU-160-W page 25 of 37... -
Page 26: S-1000 & S-1050 Beacon/Strobe Operation
The S-1050 LED Beacon/Strobe has two built-in photo response features: (a) dawn/dusk transition delay of 15-30 minutes and (b) transient light acknowledgement delay of at least 3 minutes. Code Blue • 259 Hedcor Street •... - Page 27 0.22 A rms Max 0.22 A rms NOTE: Average current draw in Flash Mode will vary by selected Flash mode. The above maximum amperage draw is stated at Single 60 FPM. Code Blue • 259 Hedcor Street • Holland, MI 49423 USA •...
-
Page 28: Power Requirements
CB 4 Series Administrator Guide 7 Power Requirements The following tables on pages 28-31 include and ALL OTHER Code Blue devices & enclosures for reference. Code Blue • 259 Hedcor Street • Holland, MI 49423 USA • 800.205.7186 • www.codeblue.com... - Page 29 CB 4 Series Administrator Guide Code Blue • 259 Hedcor Street • Holland, MI 49423 USA • 800.205.7186 • www.codeblue.com GU-160-W page 29 of 37...
- Page 30 CB 4 Series Administrator Guide Code Blue • 259 Hedcor Street • Holland, MI 49423 USA • 800.205.7186 • www.codeblue.com GU-160-W page 30 of 37...
- Page 31 CB 4 Series Administrator Guide Code Blue • 259 Hedcor Street • Holland, MI 49423 USA • 800.205.7186 • www.codeblue.com GU-160-W page 31 of 37...
-
Page 32: Locating Unit Serial Numbers
CB 4 Series Administrator Guide 8 Locating Unit Serial Numbers CB 4-s CB 4-r SERIAL NUMBER LOCATION CB 4-s with CB 4-u Dual Faceplates Code Blue • 259 Hedcor Street • Holland, MI 49423 USA • 800.205.7186 • www.codeblue.com GU-160-W... -
Page 33: Maintenance Schedule
ANNUALLY Replace batteries used with NightCharge®, cellular or RF systems (Replace with batteries recommended by the communication manufacturer to ensure optimal performance) Code Blue • 259 Hedcor Street •... - Page 34 The Surface Care Frequency table below provides general guidelines to assist in configuring a schedule. Please note that the frequency of care required to guard the Code Blue unit’s surface from damage will also be dictated by local environmental characteristics.
-
Page 35: Warranty
10 Warranty Code Blue Corporation provides a limited warranty on this product. Refer to your sales agreement to establish the terms. In addition, Code Blue’s standard warranty language, as well as information regarding support for this product while under warranty, is available at www.codeblue.com/support... -
Page 36: Download Information
CB 4 Series Administrator Guide 11 Download Information Code Blue now has a centralized location where you can find installation, setup, information, configuration and operation instructions. Admin Guides: www.codeblue.com/resources/guides Frimware: www.codeblue.com/resources/firmware Maintenance Tips: www.codeblue.com/support Product Sheets: www.codeblue.com/resources/sheets Specifications: www.codeblue.com/resources/specifications For Legacy Product Information: www.codeblue.com/legacy-products... -
Page 37: Legal & Regulatory Information
This digital apparatus complies with CAN ICES-3 (Class A). The product shall and fitness for a particular purpose. Code Blue shall not be liable or be connected using a shielded network cable (STP) that is properly responsible for incidental or consequential damages in connection with grounded.
Need help?
Do you have a question about the CB4 Series and is the answer not in the manual?
Questions and answers