HP Pro G2 SFF Manual page 30

Table of Contents

If you are removing a PCI Express ×16 card, remove the Torx screw that secures the card to the

back of the chassis (1). Pull the retention arm on the back of the expansion socket (2) away from

the card, and then carefully rock the card back and forth until the connectors pull free from the

socket. Lift the card straight up (3) to remove it. Be sure not to scrape the card against other

components.

If you are removing a PCI Express ×1 or PCI expansion card, remove the Torx screw that secures the

card to the back of the chassis (1), and then lift the card straight up (2) to remove it. Be sure not to

scrape the card against other components.

TIP:

PCI and PCI Express ×1 sockets do not have a retention arm.

NOTE:

The following image shows a PCIe expansion card.

Expansion cards

Table of Contents