Table of Contents
Advertisement
Reverse steps 1 to 6 to
7.
install the new lamp
module.
While installing, align the
lamp module and ensure it
is level to avoid damage.
Note:
The lamp module must sit
securely in place before
tightening the screws.
The lamp connector must
be connected properly and
place as drawing before
Lamp compartment cover
installation back.
！
Warning:
Lamp Connector must be installed flush with the connector base as shown in the image below.
A gap between the Lamp Connector and the connector base will cause damage to the projector.
The following images illustrate correct and incorrect Lamp Connector installations.
No Gap
Correct
— 50 —
Gap
Incorrect
Advertisement
Table of Contents
