Advertisement
Available languages
Available languages
C
H
ARE AND
ANDLING
The Multi-Tube Vortexer should be given the care normally required for any electrical appliance. Avoid wetting or unnecessary exposure to
fumes. The finish can be washed with water and soap or detergents, using a cloth or sponge. Do not allow water to get inside the unit.The
foam pad and racks may be soaked in water with mild detergent. Rinse in plain water and squeeze out excess. Allow to dry before using.
E
C
NVIRONMENTAL
ONDITIONS
Non-Operating Storage:
Temperature: -20 to 65 deg. C (-4 to 149 deg. F)
Humidity:
20% to 85% RH, non-condensing
Operating Conditions:
Indoor use only
Temperature: 18 to 33 deg. C (64 to 91 deg. F)
Humidity:
20% to 85% RH, non-condensing
Altitude:
0 to 6,562 ft. (2000 M) above sea level
Installation Category II and Pollution Degree 2 in accordance with IEC 664
S
I
AFETY
NSTRUCTIONS
Warning
Please read this entire manual before operating the Multi-Tube Vortexer.
Warning
DO NOT lift your Multi-Tube Vortexer by the trays or they can be damaged. Top tray is removable. Only a qualified service technician
should remove bottom tray.
Warning
Do not use Multi-Tube Vortexer in a hazardous atmosphere or with hazardous materials for which the unit was not designed. Also, the
user should be aware that the protection provided by the equipment might be impaired if used with accessories not provided or re-
commended by manufacturer, or used in a manner not specified by the manufacturer.
Warning
Wipe up spills immediately to prevent electrical shock. Unplug from power before cleaning and do not operate until clean up is com-
plete. DO NOT immerse.
Warning
Do not operate the unit if it shows signs of electrical or mechanical damage.
2
Advertisement
