LENCO LBT-335 User Manual page 20

Overhang
Power Consumption
Outboard Power Supply
Dimensions (W x H x D)
Weight
Technical Specifications: 2M RED (Ortofon)
Frequency response
Recommended load resistance
Channel balance
Amplifier connection
Channel separation
Recommended tracking force
Output voltage
Weight
Potential Incorrect Use and Fault Conditions
These turntables are manufactured to the highest standards and undergo strict
quality controls before leaving the factory. Faults that may possibly occur are
not necessarily due to material or production faults but can sometimes be
caused by incorrect use or unfortunate circumstances. Therefore the following
list of common fault symptoms is included.
The platter doesn't turn although the unit is switched on:
- The unit is not connected to the main power supply.
- No power at the outlet.
- Drive belt is not installed or has slipped off.
- The unit automatically switched in standby mode, power ON again.
0.73in
6W (Max)
12V/500mA AC‐DC
420 x 360 x 125mm
4.8kgs
20Hz‐20kHz
47kohms
1.5dB
MM ‐ input
22dB
1.8±0.2g
5.5mV
7.2g
19