LENCO LBT-335 User Manual page 12

1.5 ‐ 1.75g
1.75 ‐ 2g
Slip the loop of the anti‐skating weight's thread over the 3rd groove of the stub
to set the correct anti‐skating force for the factory‐fitted cartridge. Feed the
thread through the loop of the wire support.
Stereo System connection
RCA Jacks
∙ The RCA Jacks of this unit are shared as both the Phone output
jacks and the Line output jacks. They are determined by the
Phono/Line Switch.
∙ When used as a line output, the jacks output analog line‐level
signals and could be connected directly with a pair of active
speakers or the appropriate input of your stereo system. When
used as a Phono output, they should be connected to the phono
pre‐amplifier or the phono input of the stereo system.
∙ The Red plug connects with the Right channel and the White
plug connects with the Left channel.
Note:
∙ If the Phono/Line switch is set at LINE position but RCA jacks
connected to the stereo system's phono input, the sound might
be distorted due to input overload and could damage your
stereo system.
∙ If the Phono/Line switch is set at PHONO position but RCA jacks
connected to the stereo system's line input, the volume will be
very low due to lacking signal pre‐amplification.
rd
3 " " "
4 th " " "
11