Advertisement
Section 4: Operation
Power
The touch display ships in an ON state.
To turn the touch display on or off, press the touch display power button on the OSD controller
once. The power status LED on the OSD controller functions according to the following table.
Touch Display/Computer Module Status
OFF
SLEEP
ON
The system consumes low power when in SLEEP and OFF modes. For detailed power consumption
specifications, refer to technical specifications on the Elo website http://www.elotouch.com
Touching the screen will bring the attached host PC out of SLEEP mode (similar to moving the mouse or pressing a keyboard key).
To improve reliability and reduce wasteful power consumption, disconnect the AC power cable from the monitor when long periods of disuse are planned.
Touch
Your touch display is factory-calibrated and should not need manual calibration (unless the input video is not fully
scaled to the native resolution, or the touch experience needs to be calibrated to a specific user).
User Manual - 90 Series
LED Status
OFF
PULSING
ON
9
Advertisement
