Sinoboom 1018RD Operation Manual

Hide thumbs Also See for 1018RD:

Maintenance manual (116 pages)

Table Of Contents

100

101

102

103

104

page of 104

/ 104
Contents
Table of Contents
Bookmarks

Table of Contents

Quick Links

Download this manual

Part No.502003100002

Rev: A

Jul. 2021

Operation

Manual

产品说明书

PRODU

C T MAN U AL

1018RD/3369RD

1218RD/4069RD

0608E (2132E)

G T JZ

0808E (2732E)

G T JZ

0808E (2732E)

G T JZ

0808E (2732E)

Table of Contents

Need help?

Do you have a question about the 1018RD and is the answer not in the manual?

Questions and answers

Summary of Contents for Sinoboom 1018RD

Page 1 Operation Part No.502003100002 Rev: A Manual Jul. 2021 产品说明书 PRODU C T MAN U AL 1018RD/3369RD 1218RD/4069RD 0608E (2132E) G T JZ 0808E (2732E) G T JZ 0808E (2732E) G T JZ G T JZ 0808E (2732E)
Page 3 Operating, servicing and maintaining this vehicle or equipment can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle or equipment in a well-ventilated area and wear gloves or wash your...
Page 4 : No.128, East Jinzhou Avenue, Ningxiang High-tech Industrial Park, Changsha, Hunan, China Zip Code : 410600 Copyright © Hunan Sinoboom Intelligent Equipment Co., Ltd. All Rights Reserved The final interpretation right of this manual belongs to Hunan Sinoboom Intelligent Equipment Co., Ltd.
Page 5 Decals/Nameplate Inspection for details.) Trade Identification Models Serial Numbers Imperial Metric 0200300150 to present 1018RD 1018RD 3369RD 0200400200 to present 1218RD 1218RD 4069RD NOTE: • Product model is applied in product nameplate for distinction of products of different main parameters.
Page 6 This Page Intentionally Left Blank...
Page 7 This manual covers the basic parts information of one or more products. Therefore, please use this manual according to your needs. If you find problems in the manual or have suggestions for improve- ment, feel free to share your feedback with Sinoboom, and we will address these issues as soon as possible.
Page 8 This Page Intentionally Left Blank...
Page 9: Table Of Contents
Collision Hazards ..... 3-7 Sinoboom Control System) ... 6-3 Crush Hazards ......3-8 Preparation .
Page 10 Report ....... . . 9-2 Sinoboom Control System) ... 6-9 Major Modification and Repair Record 9-5 Preparation .
Page 11: Introduction
The owner or administrator of the machine shall also provide the manufacturer’s maintenance information to the person responsible for maintaining the machine. If you have any questions, contact Hunan Sinoboom In- telligent Equipment Co., Ltd.. 1018RD&1218RD Operation Manual © Jul. 2021...
Page 13: Machine Specifications
MACHINE SPECIFICATIONS Table 1-1 1018RD specifications 1018RD (METRIC) 3369RD (IMPERIAL) MEASURE DIMENSION Max. platform height 10 m 32ft 9.7in Max. working height 12 m 39ft 4.4in Max. horizontal reach 1.5 m 4ft 11.1in Overall length (stowed, with/without 3.8 m/3.19 m 12ft 5.6in/10ft 5.6in...
Page 14 MACHINE SPECIFICATIONS Table 1-1 1018RD specifications (continued) 1018RD (METRIC) 3369RD (IMPERIAL) MEASURE Max. outrigger leveling angle (side- 11.7° to-side) Turning radius (inside) 2.11 m 6ft 11.1in Turning radius (outside) 4.6 m 15ft 1.1in Max. allowable side force (indoor/ 400 N...
Page 15 2°/0.8° side, outrigger retracted/extended) Max. outrigger leveling angle (front- 5.3° (front)/4.2° (back) to-back) Max. outrigger leveling angle (side- 11.7° to-side) Turning radius (inside) 2.11 m 6ft 11.1in Turning radius (outside) 4.6 m 15ft 1.1in 1018RD&1218RD Operation Manual © Jul. 2021...
Page 16 Max. allowable RH Stored at -20℃ to 50℃ (-4℉ to 122℉) in a well-ventilated environment Storage conditions with 90% relative humidity (20℃ [68℉]), and away from rain, sun, corrosive gas, inflammables and explosives. WEIGHT © Jul. 2021 1018RD&1218RD Operation Manual...
Page 17 The total vibration value of the platform does not exceed 2.5m/s², and the maximum root-mean-square value of the weighted acceleration of the entire machine does not exceed 0.5m/s². g) The hydraulic tank capacity is the maximum volume in the hydraulic tank. 1018RD&1218RD Operation Manual © Jul. 2021...
Page 19: Machine Components
17. Engine 2. Platform rail 10. Ground controls with LCD display 18. Non-steer wheel 3. Lanyard anchorage point 11. Hydraulic tank 19. Entry ladder 4. Platform extension locking handle 12. Flash beacon 20. Chassis 1018RD&1218RD Operation Manual © Jul. 2021...
Page 20 The machine comes in operating/raised position when the platform is raised until the down limit switch disengages. Platform heights at which the down limit switch disengages (height from ground to platform floor): 1018RD: 2.7～3.3m (8.9ft～10.8ft) 1218RD: 2.7～3.3m (8.9ft～10.8ft) Stowed position: The machine comes in stowed position when fully retracted.
Page 21: Safety
Failure to notify the manufacturer within SAFETY DEFINITIONS 48 hours of the incident involving the machine of Hunan Sinoboom Intelligent Equipment Co., Ltd. may void the product's warranty. This safety alert symbol appears with most safety statements. It means atten-...
Page 22: Electrocution Hazards
Table 3-1 Minimum Safe Distance Voltage Minimum Safe Distance (Phase to Phase, kV) (m/ft) 0-50 3.05 (10) 50-200 4.60 (15) 200-350 6.10 (20) 350 -500 7.62 (25) 500 -750 10.67 (35) 750 -1000 13.725 (45) © Jul. 2021 1018RD&1218RD Operation Manual...
Page 23 • Do not replace key parts that affect machine stability with different weights or specifications. • Do not modify or change moving aerial platforms without the manufacturer’s prior written permission. 1018RD&1218RD Operation Manual © Jul. 2021...
Page 24: Work Environment Hazards
• If the machine can be used those specified by Sinoboom, it must be approved or outdoors, never operate it during guided by the manufacturer. strong winds or gusts. Do not lift the platform when the wind speed exceeds 12.5 m/s (18 mph).
Page 25: Unsafe Operation Hazards
NOTICE Maximum gradeability is applicable for machines with platform retracted. Gradeabilty: 1018RD: 35% (19°) 1218RD: 35% (19°) Gradeability means the maximum allowable tilt angle of the machine when it is on solid ground and the platform is only capable of carrying one person. As the weight of the machine’s platform increases, the...
Page 26: Fall Hazards
• Do not put the load outside the platform. • When the platform is caught or stuck or when other objects in the vicinity impede its normal movement, do not use the © Jul. 2021 1018RD&1218RD Operation Manual...
Page 27: Collision Hazards
• Maintain good judgment and plan- ning when using the controller on the ground to operate the ma- chine. Maintain proper distance between operator, machine and fixed object. 1018RD&1218RD Operation Manual © Jul. 2021...
Page 28: Crush Hazards
Maintain good judgment and plan- maintenance requirements in the Operation Manual ning when using the controller on and the Maintenance Manual. the ground to operate the ma- chine. Maintain proper distance between operator, machine and fixed object. © Jul. 2021 1018RD&1218RD Operation Manual...
Page 29: Bodily Injury Hazards
During operation, keep the left and right doors of the chassis closed and locked. Only trained service personnel can open the left and right doors to repair the machine. 1018RD&1218RD Operation Manual © Jul. 2021...
Page 30 • Do not tamper with battery system to avoid serious accident. • Cut off the battery main switch if the battery is not to be used for an extended period. © Jul. 2021 3-10 1018RD&1218RD Operation Manual...
Page 31: Hydraulic Systems Hazard
WELDING AND POLISHING REQUIREMENTS Before welding, grinding and polishing operations, al- ways ensure you read and understand all operation and maintenance requirements in the Operation Manual and the Maintenance Manual. 1018RD&1218RD Operation Manual 3-11 © Jul. 2021...
Page 32: After Using The Machine
5. Block the wheels with the wheel wedges. 6. Charge the battery. NOTICE After using the machine, the power off switch must be disconnected. © Jul. 2021 3-12 1018RD&1218RD Operation Manual...
Page 33: Jobsite Inspection
Operators must identify and avoid workplace hazards when mov- ing, installing and operating the machine. Unless approved by Sinoboom, never operate the ma- chine in a hazardous site. The following items present danger on the jobsite: •...
Page 35: Pre-Operation Inspection
• Only qualified maintenance technicians can repair be certified as a qualified operator in operation of the machine according to the manufacturer's this machine. regulations. After any maintenance, the operator 1018RD&1218RD Operation Manual © Jul. 2021...
Page 36: Conducting A Pre-Operation
Drive motors If the machine has to be inspected with platform • Wear pads raised, please be sure the safety arm is properly set • Tires and wheels • Limit switches, alarms and horn © Jul. 2021 1018RD&1218RD Operation Manual...
Page 37: Inspecting Engine Oil Level
20W-50 0℃～50℃ Perform the following procedure with the platform retracted: 1. Visually inspect on the hydraulic tank side to be sure the hydraulic oil level is whithin the marking range of sight gauge. 1018RD&1218RD Operation Manual © Jul. 2021...
Page 38: Inpsecting Fuel Level
Lowest temperature 8℃ or higher INPSECTING FUEL LEVEL Lowest temperature 4℃ or higher Lowest temperature -5℃ or higher -10# NOTICE Lowest temperature -14℃ or higher -20# Be sure to shut down the engine before inspection. © Jul. 2021 1018RD&1218RD Operation Manual...
Page 39: Inspecting The Battery
NOTICE Wear protective clothing and goggles to inspect the battery after fully charged. Ensure the battery wiring is tight and free of corrosion. Ensure the battery holder is properly positioned and secure. 1018RD&1218RD Operation Manual © Jul. 2021...
Page 40: Inspecting Coolant Level
50% ethylene glycol and 2. Open the cover of coolant box over the radiator to -32℃～0℃ 50% water mixed coolant inspect the coolant level. 60% ethylene glycol and -54℃～-32℃ 40% water mixed coolant © Jul. 2021 1018RD&1218RD Operation Manual...
Page 41 170ppm, chloride less than 40 ppm and sulphur less than 100ppm. Excessive calcium and magnesium can lead to scale formation, and excessive chloride and sulfate can corrode the cooling system. 1018RD&1218RD Operation Manual © Jul. 2021...
Page 43: Pre-Operation Function Test
• Check the work site. NOTICE • Check the safety decals/ name- plate on the machine. All tests on the ground controller should be completed in one cycle. 1018RD&1218RD Operation Manual © Jul. 2021...
Page 44: Preparation
OFF position NOTICE after being released. In cold weather, the LCD screen needs warming up before it properly displays anything. © Jul. 2021 1018RD&1218RD Operation Manual...
Page 45: Ground/Platform Select Switch
ENGINE PREHEAT SWITCH CONTROL SYSTEM) NOTICE Press the engine preheat switch and hold it for 6-10s, All tests on the ground controller shall be completed the engine should take in air for preheating. within one cycle. 1018RD&1218RD Operation Manual © Jul. 2021...
Page 46: Preparation
PRE-OPERATION FUNCTION TEST POWER CAUTION Figure 6-2 Ground controller (Sinoboom control system) Table 6-2 7. Neutral position 13. Platform up switch 1. Hour meter 2. Emergency stop button 8. Natural gas switch (not used) 14. Platform up/down enable switch 15. Emergency lowering 3.
Page 47: Ground/Platform Select Switch
2. Pull out the emergency stop button on ground controller to ON position, and press the engine start switch, the engine can be normally started. 1018RD&1218RD Operation Manual © Jul. 2021...
Page 48: Testing The Platform Controller
10. Drive speed select switch (with 4. Horn button 16. LCD screen indicator light) 5. Engine speed select switch (with 11. Enable switch indicator light) 6. Hydraulic generator switch (with 12. Drive/lift proportional control indicator light, if equipped) joystick © Jul. 2021 1018RD&1218RD Operation Manual...
Page 49: Preparation
Press the horn button, the horn should sound. started smoothly without abnormal noises. Note: The switch shall be inoperative after the engine LIGHTING SWITCH (OPTIONAL) is started. Press the lighting switch, the switch should be lit and the lighting turns on. 1018RD&1218RD Operation Manual © Jul. 2021...
Page 50: Engine Speed Select Switch
STEER THUMB ROCKER SWITCH Note: The machine is running at low drive speed by default. NOTICE When testing the steer/drive functions, the operator should stand on the platform facing towards the machine steer direction. © Jul. 2021 1018RD&1218RD Operation Manual...
Page 51: Outrigger Leveling
4. The respective outrigger should retract. AUTO AUTO AUTO POWER Figure 6-4 Platform controller (Sinoboom control system) Table 6-4 1. Individual outrigger level switch 7. Emergency stop button 13. LED screen 2. Outrigger self-level switch 8. Enable switch 14.
Page 52: Preparation
HORN BUTTON POWER Press the ignition switch, the engine should be started smoothly without abnormal noises. Press the horn button, the horn should sound. Note: This switch will be inoperative after engine startup. © Jul. 2021 6-10 1018RD&1218RD Operation Manual...
Page 53: Engine Speed Select Switch
Note: The raising/lowering speed is in direct proportion to the stroke of the joystick. STEER THUMB ROCKER SWITCH NOTICE When testing the steer/drive functions, the operator should stand in the platform facing towards the machine steer direction. 1018RD&1218RD Operation Manual 6-11 © Jul. 2021...
Page 54: Climbing Mode
3. Press the engine start switch on platform controls. 4. Press the platform lift switch. 5. Hold the joystick enable switch and slowly deflect forward the joystick to raise the platform to a height and release the joystick. © Jul. 2021 6-12 1018RD&1218RD Operation Manual...
Page 55: Testing The Level Sensor
2. With the machine in stowed position, place 2 wooden blocks near the two front or rear wheels, 2. Pull out the emergency stop buttons on ground and then drive the machine upon the wooden blocks. platform controllers to ON position. 1018RD&1218RD Operation Manual 6-13 © Jul. 2021...
Page 56: Testing The Oscillate Outriggers
With the scissor arm fully retracted, gradually add loads to the platform. NOTICE Do not stand in the platform but on the ground to perform this testing using platform controller. © Jul. 2021 6-14 1018RD&1218RD Operation Manual...
Page 57 15°(59°F), the overload alarm may be triggered (the display screen on platform or ground controller indicates “OL”) even if the platform load does not exceed the rated load, in this circumstance, please re-calibrate the weight sensor. 1018RD&1218RD Operation Manual 6-15 © Jul. 2021...
Page 58 PRE-OPERATION FUNCTION TEST This Page Intentionally Left Blank © Jul. 2021 6-16 1018RD&1218RD Operation Manual...
Page 59: Operating The Machine
2. Ensure the red emergency stop buttons on ground must all be qualified operators and follow all the safety and platform controllers are pulled out to ON rules and instructions in this Operation Manual. position. 3. Press the engine start switch. 1018RD&1218RD Operation Manual © Jul. 2021...
Page 60: Emergency Lowering
OFF position after being released. Before operation: 1. Turn the key switch to Ground position. 2. Pull out the emergency stop buttons on ground and platform controllers to ON position. 3. Start the engine. © Jul. 2021 1018RD&1218RD Operation Manual...
Page 61: Selecting Engine Speed
3. Start the engine. Use the color-coded direction arrows on the platform controller to identify the travel direction of the machine. NOTICE Machine travel speed is restricted when the platform is raised. To select drive speed 1018RD&1218RD Operation Manual © Jul. 2021...
Page 62: Driving On A Slope
Start the machine before operating the outriggers. Be sure to operate the outriggers with the machine To determine the slope grade： stowed, never raised. Measure the slope grade using a digital slope gauge or following the procedure as below: © Jul. 2021 1018RD&1218RD Operation Manual...
Page 63 If any outrigger fail to retract in place, the screen on the platform controller will display “or”.When any outrigger is in contact with the ground, the drive and steer functions will be disabled. 1018RD&1218RD Operation Manual © Jul. 2021...
Page 65: Transporting And Lifting The Machine
3. Perform the above procedures inversely to re- rolling. engage the brake and stablize the wheels from motion. NOTICE Do not tow the machine unless an emergency, failure or loss of power occurs. 1018RD&1218RD Operation Manual © Jul. 2021...
Page 66: Transporting The Machine
Retract the extension platform to secure it to the slot, horizontal. and ensure the extension platform will not extend or shake out from the main platform during transport. NOTICE To protect the platform guardrail, choose the appropriate length of rigging. © Jul. 2021 1018RD&1218RD Operation Manual...
Page 67: Maintenance
Conduct a quarterly inspection on machines that pany to perform a pre-delivery inspection. have been out of service for a period lasting longer than three months. 2. Follow this procedure each time before delivery. Performing a pre-delivery inspection could reveal 1018RD&1218RD Operation Manual © Jul. 2021...
Page 68: Following Amaintenance Schedule
Every day or every 8 hours maintenance procedure requirements. Every quarter or every 250 hours 2. The Repair & Inspection Report shall include the inspection table of each regular inspection. © Jul. 2021 1018RD&1218RD Operation Manual...
Page 69 A-14 Functional Tests A-15 Perform Maintenance after 30 Days Checklist B Procedures REPAIRED/ YES/Machine is NO/Machine Has Problem Machine Has Items in Good Damage or Description Been Repaired Condition Malfunction B-1 Inspect Electrical Wiring 1018RD&1218RD Operation Manual © Jul. 2021...
Page 70 C-3 Replace Engine Oil Filter C-4 Test Weighing System C-5 Test Secondary Lowering Checklist D Procedures REPAIRED/ YES/Machine is NO/Machine Has Problem Machine Has Items in Good Damage or Description Been Repaired Condition Malfunction © Jul. 2021 1018RD&1218RD Operation Manual...
Page 71: Major Modification And Repair Record
“Good” condition before company. continuing to use the machine. Table 9-3 Major Modification and Repair Record Model Serial No. Machine Repair- Repairman’s Status Problem Description Modification/Repair Item Date Company and Signature Position ter Change 1018RD&1218RD Operation Manual © Jul. 2021...
Page 73: Decals/Nameplates Inspection
Do not operate the engine if there are missing or badly worn safety decals. 1018RD&1218RD Operation Manual 10-1 © Jul. 2021...
Page 74: Decals/Nameplates(Gb)
Decal position for models without outriggers Decal position for models without outriggers Decal position for models with outriggers Decal position for models with outriggers 30 31 Decal position for models with outriggers Decal position for models with outriggers © Jul. 2021 10-2 1018RD&1218RD Operation Manual...
Page 75 Decal-Operation requirements 1218RD 101012100019 Decal-Tipping hazard 102004100040 Decal-Crush hazard 101014100026 Decal-Safety arm 101016100030 Decal-Lanyard anchorage 101056103002 Decal-Main power disconnect switch 102001103001 Nameplate-GB 215050000012 Blind rivet 4×8-ZnD GB/T 1261 102001103016 Decal-LOGO, white 102009103000 Decal-1018RD 1018RD&1218RD Operation Manual 10-3 © Jul. 2021...
Page 76 Remarks 102010103000 Decal-1218RD 104011100010 Decal-Hydraulic oil level 104011100003 Decal-Hydraulic oil level 101055103016 Decal-Emergency stop button 104009100018 Decal-Hydraulic oil 216060000004 Decal–Caution tape, 50mm wide 101014100036 Decal-Warranty 101014100034 Decal-Contact information 102010103002 Decal-D1105-E4B-EU-X1 environmental protection info © Jul. 2021 10-4 1018RD&1218RD Operation Manual...
Page 77: Decals/Nameplates(As)
Decals position for models without outriggers Decals position for models without outriggers Decals position for models with outriggers Decals position for models with outriggers 30 31 Decals position for models with outriggers Decals position for models with outriggers 1018RD&1218RD Operation Manual 10-5 © Jul. 2021...
Page 78 Decal-Operation requirements 1218RD 102004100015 Decal-General safety 102004100040 Decal-Crush hazard 101014100026 Decal-Safety arm 101016100030 Decal-Lanyard anchorage 101016100031 Decal-Main power disconnect switch 102001103002 Nameplate-AS 215050000012 Blind rivet 4×8-ZnD GB/T 1261 102001103016 Decal-LOGO, white 102009103000 Decal-1018RD © Jul. 2021 10-6 1018RD&1218RD Operation Manual...
Page 79 Part No. Remarks 102010103000 Decal-1218RD 104011100010 Decal-Hydraulic oil level 104011100003 Decal-Hydraulic oil level 101055103015 Decal-Emergency stop button 104009100022 Decal-Hydraulic oil 102003100003 Decal-1018RD operation requirements 102004100005 Decal-1218RD operation requirements 216060000004 Decal–Caution tape, 50mm wide 1018RD&1218RD Operation Manual 10-7 © Jul. 2021...
Page 80: Decals/Nameplates(Ce-Imperial)
Decals position for models without outriggers Decals position for models without outriggers Decals position for models with outriggers Decals position for models with outriggers 30 31 Decals position for models with outriggers Decals position for models with outriggers © Jul. 2021 10-8 1018RD&1218RD Operation Manual...
Page 81 Decal-Operation requirements 1218RD 101012100019 Decal-Tipping hazard 102004100040 Decal-Crush hazard 101014100026 Decal-Safety arm 101016100030 Decal-Lanyard anchorage 101016100031 Decal-Main power disconnect switch 102001103003 Nameplate-CE 215050000012 Blind rivet 4×8-ZnD GB/T 1261 102001103016 Decal-LOGO, white 102009103001 Decal-3369RD 1018RD&1218RD Operation Manual 10-9 © Jul. 2021...
Page 82 DECALS/NAMEPLATES INSPECTION Description Qty. Part No. Remarks 102010103001 Decal-4069RD 104011100010 Decal-Hydraulic oil level 104011100003 Decal-Hydraulic oil level 101055103015 Decal-Emergency stop button 104009100022 Decal-Hydraulic oil 216060000004 Decal–Caution tape, 50mm wide © Jul. 2021 10-10 1018RD&1218RD Operation Manual...
Page 83: Decals/Nameplates(Ce-Metric)
Decals position for models without outriggers Decals position for models without outriggers Decals position for models with outriggers Decals position for models with outriggers 30 31 Decals position for models with outriggers Decals position for models with outriggers 1018RD&1218RD Operation Manual 10-11 © Jul. 2021...
Page 84 Decal-Operation requirements 1218RD 101012100019 Decal-Tipping hazard 102004100040 Decal-Crush hazard 101014100026 Decal-Safety arm 101016100030 Decal-Lanyard anchorage 101016100031 Decal-Main power disconnect switch 102001103003 Nameplate-CE 215050000012 Blind rivet 4×8-ZnD GB/T 1261 102001103016 Decal-LOGO, white 102009103000 Decal-1018RD © Jul. 2021 10-12 1018RD&1218RD Operation Manual...
Page 85 DECALS/NAMEPLATES INSPECTION Description Qty. Part No. Remarks 102010103000 Decal-1218RD 104011100010 Decal-Hydraulic oil level 104011100003 Decal-Hydraulic oil level 101055103015 Decal-Emergency stop button 104009100022 Decal-Hydraulic oil 216060000004 Decal–Caution tape, 50mm wide 1018RD&1218RD Operation Manual 10-13 © Jul. 2021...
Page 86: Decals/Nameplates(Csa)
Decals position for models without outriggers Decals position for models with outriggers Decals position for models with outriggers 30 31 104011100010 Decals position for models with outriggers Decals position for models with outriggers © Jul. 2021 10-14 1018RD&1218RD Operation Manual...
Page 87 Decal-Operation requirements 1218RD 102010103006 Decal-Tipping hazard 101012100019 102004100040 Decal-Crush hazard Decal-Safety arm 101014100026 Decal-Lanyard anchorage 101016100030 Decal-Main power disconnect switch 101016100031 Nameplate-CSA 102001103005 215050000012 Blind rivet 4×8-ZnD GB/T 1261 Decal-LOGO, white 102001103016 102009103001 Decal-3369RD 1018RD&1218RD Operation Manual 10-15 © Jul. 2021...
Page 88 Description Qty. Part No. Remarks 102010103001 Decal-4069RD Decal-Hydraulic oil level 104011100010 Decal-Hydraulic oil level 104011100003 Decal-Emergency stop button 101055103015 Decal-Hydraulic oil 104009100022 Decal-Annual inspection 101040103015 Decal–Caution tape, 50mm wide 216060000004 104011100021 Decal-Crush hazard © Jul. 2021 10-16 1018RD&1218RD Operation Manual...
Page 89: Decals/Nameplates(Ansi)
Decals position for models without outriggers Decals position for models without outriggers Decals position for models with outriggers Decals position for models with outriggers 30 31 Decals position for models with outriggers Decals position for models with outriggers 1018RD&1218RD Operation Manual 10-17 © Jul. 2021...
Page 90 Decal-Operation requirements 1218RD 102010103006 Decal-Tipping hazard 101012100019 102004100040 Decal-Crush hazard Decal-Safety arm 101014100026 Decal-Lanyard anchorage 101016100030 Decal-Main power disconnect switch 101016100031 Nameplate-ANSI 102001103004 215050000012 Blind rivet 4×8-ZnD GB/T 1261 Decal-LOGO, white 102001103016 102009103001 Decal-3369RD © Jul. 2021 10-18 1018RD&1218RD Operation Manual...
Page 91 DECALS/NAMEPLATES INSPECTION Description Qty. Part No. Remarks 102010103001 Decal-4069RD Decal-Hydraulic oil level 104011100010 Decal-Hydraulic oil level 104011100003 Decal-Emergency stop button 101055103015 Decal-Hydraulic oil 104009100022 Decal-Annual inspection 101040103015 Decal–Caution tape, 50mm wide 216060000004 1018RD&1218RD Operation Manual 10-19 © Jul. 2021...
Page 92 DECALS/NAMEPLATES INSPECTION This Page Intentionally Left Blank © Jul. 2021 10-20 1018RD&1218RD Operation Manual...
Page 93: Appendix 1: Symbols And Description
Collision hazards-Re- Electrocution hazards Electrocution hazards Keep a safe distance Tip-over hazards-Avoid lease brake on ramp on platform on the ground and from power lines uneven ground platform 1018RD&1218RD Operation Manual © Jul. 2021...
Page 94 Indoor use handle position and down platform Outdoor use The side force Electrocution hazards Wear protective cloth- Battery explosion ing and glasses hazard No smoking No smoking Only professional Improve point Lashing points maintenance © Jul. 2021 1018RD&1218RD Operation Manual...
Page 95 DECALS/NAMEPLATES INSPECTION personnel can start the maintenance Tire to ground load Forklift fork position Platform carrying Carrying capacity of Hydraulic oil filler capacity fixed and extended platform Horn Tool or weight Fast/high speed Slow/low speed 1018RD&1218RD Operation Manual © Jul. 2021...
Page 97: Appendix 2: Prepare The Work Record Before Delivery
2. Use the table to record the results. After each section is complete, mark the appropriate box. 3. Record the inspection results. If any inspection results are "NO", the machine must be stopped, and re-in- spected after repair is completed and the box marked "inspection" must be checked. 1018RD&1218RD Operation Manual © Jul. 2021...
Page 99: Appendix 3: Repair & Inspection Report
A-14 Functional Tests A-15 Perform Maintenance after 30 Days Checklist B Procedures REPAIRED/ YES/Machine is NO/Machine Has Problem Machine Has Items in Good Damage or Description Been Repaired Condition Malfunction B-1 Inspect Electrical Wiring 1018RD&1218RD Operation Manual © Jul. 2021...
Page 100 C-3 Replace Engine Oil Filter C-4 Test Weighing System C-5 Test Secondary Lowering Checklist D Procedures REPAIRED/ YES/Machine is NO/Machine Has Problem Machine Has Items in Good Damage or Description Been Repaired Condition Malfunction © Jul. 2021 1018RD&1218RD Operation Manual...
Page 101 4. Record the inspection results. If any inspection results are "NO", the machine must be stopped and re- inspected after repair is completed and marked in the box marked "inspection". Select the appropriate inspection procedure based on the inspection type. Select the procedures as appropriate for the type of inspection. 1018RD&1218RD Operation Manual © Jul. 2021...
Page 102 DECALS/NAMEPLATES INSPECTION This Page Intentionally Left Blank © Jul. 2021 A-10 1018RD&1218RD Operation Manual...
Page 103: Appendix 4: Major Modification And Repair Record
Modification/Repair” in the form will be “Good” and the machine can be used. If either inspection result is “NO”, the machine must be re-inspected after the repair is completed until the machine is in “Good” condition before continuing to use the machine. 1018RD&1218RD Operation Manual A-11 © Jul. 2021...
Page 104 Solution s Alw ays For B et t er A ccess Solution s Always for Better Access Solutions AS/N ZS Hunan Sinoboom Intelligent Equipment Co., Ltd. 长沙市宁乡高新技术产业园区金洲大道东 128 号 No.128, East Jinzhou Avenue, Ningxiang High-tech Industrial Park, Changsha, Hunan, China 市宁乡高新技术产业园区金洲大道东...

This manual is also suitable for:

3369rd 1218rd 4069rd

Sinoboom 1018RD Operation Manual

Quick Links

Need help?

Questions and answers

Related Manuals for Sinoboom 1018RD

Summary of Contents for Sinoboom 1018RD

This manual is also suitable for:

Table of Contents