Disable Direct Hazards / Safety Regulations - Hyundai KONA Hybrid Emergency Response Manual

3. Disable direct hazards / safety regulations

The final step in the initial response process, conducted after immobilising the vehicle, is to
disable the vehicle, its SRS components and the high voltage electrical system. To prevent
current flow through the system, use the following procedure to disable the vehicle.
Power Off
3.1 Disabling the System – Smart Key System and "POWER"
START/STOP Button
1. Confirm the status of the READY light on the instrument panel. If the
light is illuminated, the vehicle is ON.
a) If the READY light is NOT illuminated, the vehicle is off. Do not push the
"POWER" START/STOP button because the vehicle may start (go into READY
mode).
b) To turn OFF the system, press the 'P'(Park) button, and press the POWER button.
Press park (P) position
12V battery
disconnection
"POWER" START/STOP Button
High voltage shut off
READY
7