Table of Contents
Advertisement
3. Disable direct hazards/Safety regulations.
The final step in the initial response process, conducted after immobilising the vehicle, is to disable the vehicle, its SRS
components and the high-voltage electrical system. To prevent current flow through the system, use the following procedure
Power Off
to disable the vehicle.
Power Off
3.1 Disabling the System
Confirm the status of the READY light on the instrument panel. If the READY light is illuminated, the vehicle is ON.
1.
a)
If the READY light is NOT illuminated, the vehicle is off. Do not push the "POWER" START/STOP button because the
vehicle may start (go into READY mode).
b) To turn OFF the system, position the shift lever in Park and press the POWER button.
Press park (P) position
Press park (P) position
Press park (P) position
12V battery
disconnection
12V battery
disconnection
"POWER" START/STOP Button
"POWER" START/STOP Button
"POWER" START/STOP Button
High-voltage shut off
High-voltage shut off
7
Advertisement
Table of Contents
