Hyundai KONA Hybrid Emergency Response Manual page 10

3. Disable direct hazards / safety regulations
b) Open the junction block upper cover and find the High voltage cut-off switch (B).
c) Pull the Service interlock connector(B) to disconnect
• Before engaging in any emergency response procedures, ensure the vehicle is
disabled and wait 5 minutes to allow the capacitor in the high voltage system to
discharge to avoid electrocution.
• Exposed cables or wires may be visible inside or outside the vehicle. Never touch
the metal chassis wires, cables, connectors, or any electric components before
disabling the system, and/or shorted to the vehicle chassis.
Failure to follow these instructions will lead to serious bodily injury or death by
electrocution.
Electrocution Risk
B
B : High voltage cut-off
Switch
9