Hyundai KONA Hybrid Emergency Response Manual page 9

3. Disable direct hazards / safety regulations
Without depressing the brake pedal
Pressing
POWER button
One time
Two times
Three times
While depressing the brake pedal
Pressing
POWER button
One time
2. If necessary, lower the windows, unlock the doors and open the tail gate as required,
before disconnecting the 12V battery. Once the 12V battery is disconnected, power controls
will not operate. (Refer to below "4. a)" for 12V battery disconnection)
3. Before disconnecting the 12V battery, remove the Smart Key at least 2 meters away from
the vehicle to prevent accidental restart.
4. Follow the procedure below to disable the high voltage battery:
a) Disconnect the 12V auxiliary battery connector.
1) Open the hood and find the 12V battery connector.
2) Disconnect the 12V battery connector(A)
Button
Position/LED
ACC/ON
ON/ON
OFF
Button
Position/LED
-
Vehicle condition
Electrical accessories are operational.
The warning lights can be checked before the
vehicle is started.
Vehicle condition
Ready to drive
Off
8