Recording Usingthe Receiver; Changing Button Assignments - Sony STR-DG520 Operating Instructions Manual

Recording usingthe
receiver
You can record from a video component using
the receiver. See the operating instructions
supplied with your recording component.
1
Press one of the input buttons
to select the playback
component.
You can also use INPUT SELECTOR on
the receiver.
2
3
4
Prepare the playback
component for playing.
For example, insert the video tape you
want to copy into the VCR.
Prepare the recording
component.
Insert a blank video tape, etc. into tile
recording component (VIDEO) for
recording.
Start recording on the
recording component, then
start playback on the playback
component.
Note
Some sources cont:un copy guards to prevent
recording. In this case, you may not be able to record
from the
Sotlrce.
Changing button
assignments
You can change tile factory settings of the
input buttons to suit the components in your
system. For example, if you connect a DVD
recorder to the VIDEO jacks on the receiver,
you can set the VIDEO button on this remote
to control the DVD recorder.
1
Hold down the input button of
which you want to change the
assignment.
Example: Hold down VIDEO.
2
Referring to the table below,
press the corresponding
button for the category you
want.
Example: Press 4.
Now you can use the VIDEO button to
control the DVD recorder.
54us