Sony STR-DG520 Operating Instructions Manual page 20

The following illustration shows how to
connect a DVD player/DVD recorder.
It is not necessary to connect all the cords.
Connect audio and video cords according to
the jacks of your components.
Bet_re connecting cords, make sure to
disconnect the AC power cord (mains lead).
Notes
• To input nmlti chmmel digital audio from tile DVD
player, set tile digital audio output setting on tile
DVD player. Refer to the operating instructions
supplied with the DVD player.
• As this receiver does not have analog audio input
jacks for DVD, connect your DVD player to the
DIGITAL COAXIAL DVD IN jack on tile
receiver. To output sound from the front lefl/right
speakers only, press 2CH.
Tip
All the digital audio jacks are compatible with
32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling
frequencies.
Connecting a DVD player
Audio signals
DVD player
Video signals
O O
OCoaxial digital cord (not supplied)
_Video cord (not supplied)
l_Component video cord (not supplied)
20us