Sony STR-DG520 Operating Instructions Manual page 27

5
6
7
Press 4,/,!, repeatedly to select
"T. TONE Y".
The test tone is output from each speaker
in sequence as follows:
Front left _ Center _ Front right
Surround right _ Surround left
Sub woofer
Adjust the speaker levels and
balance using the LEVEL menu
so that the level of the test tone
sounds the same from each
speaker.
For details, see "Adjusting the le'_el
(LEVEL menu)" (page 34).
Tips
• To mljust tile level of all speakers at tile same
time, press MASTER VOL +_. You can also
use MASTER VOLUME on the receiver.
• The adjusted wflue is shown on the display
during a@lstment.
Repeat steps 1 to 5 to select
"T. TONE N".
You can also press any input buttons.
The test tone turns oft'.
When a test tone is not output
from the speakers
• The speaker cords may not be connected
securely.
• The speaker cords may have the short-circuit
problem.
Note
Tile test tolle does not "_ork when ANAL()(;
DIRECT is selected.
O
,,.,I
Q.
27us