Switching Between Digital (Input Mode); Enjoying The Digital Media (Dmport) - Sony STR-DG520 Operating Instructions Manual

Switching between
digital andanalogaudio
(INPUT MIODE)
When you connect components to both digital
and analog audio input jacks (SAT) on the
receiver, you can fix the audio input mode.
1
Turn INPUT SELECTOR on the
receiver to select the input.
You can also use tile input buttons on tile
remote.
2
Press INPUT MODE repeatedly
on the receiver to select the
audio input mode.
Tile selected audio input mode appears on
the display.
Audio input modes
• AUTO
Gives priority to digital audio signals when
there are both digital and analog
connections. If there are no digital audio
signals, analog audio signals are selected.
• ANALOG
Specifies the analog audio signals input to
the AUDIO IN (L/R)jacks.
Notes
• Some audio input modes may not be set up
depending on the input.
• When the ANALOG DIRECT function is being
used, tile audio input mode is set to "ANALOG"
amom:Jtic:dly. You cannot select ()tiler modes.
Enjoying the DIGITAL
MEDIA PORT
(DIVlPORT)
The DIGITAL MEDIA PORT (DMPORT)
allows you to enjoy sound fwm a network
system such as a portable audio source or
computer.
By connecting a DIGITAL MEDIA PORT
adapter (not supplied), you can enjoy sound
from the connected component on the
receiver.
For details, refer to the operating instructions
supplied with the DIGITAL MEDIA PORT
adapter.
Notes
• Do not connect an adapter other than tile DIGITAL
MEDIA PORT adapter.
• Before connecting cords, make sure to disconnect
the AC power cord (mains lead).
• Do not connect or disconnect the DIGITAL
MEDIA PORT adapter while the receiver is turned
on.
• Depending on the DIGITAL MEDIA PORT
adapter, video output may not be possible.
• Tile DIGITAL MEDIA PORT adapters are
available for purchase depending on the area.
50 us