Sony STR-DG520 Operating Instructions Manual page 19

The image from a video component connected
to this receiver can be displayed on a TV
screen.
It is not necessary to connect all the cords.
Connect audio and video cords according to
the jacks of your components.
Bel\_re connecting cords, make sure to
disconnect the AC power cord (mains lead).
Note
Be sure to turn oil the receiver when tile video and
audio signals of a playback component are being
output to a TV via tile receiver. Unless tile power is
turned on. neither video nor audio signals will be
transmitted.
Tips
• You can watch the selected input image when you
connect the MONITOR OUT or HDMI OUT.jack
to a TV or projector.
• To output the sound of the TV from the speakers
connected to the receiver, be sure to:
connect the audio output jacks of the TV to the
TV AUDIO IN .jacks of the receiver.
turn off TV's vohune or activate the TV's muting
function.
D
D.
TV
Audio signals Video signals
il e o IIi o
_Audio cord (not supplied)
OVideo cord (not supplied)
_Component video cord (not supplied)
1gus