Advertisement
FRONT
PANEL
FACILITIES
OQ
®@
@
®
BIONEER
(ft
@ POWER SWITCH
Power is supplied to the model RG-2 when this switch is
depressed, The power Indicator comes on 2s soort as the
ower
Is supalied,
® POWER INDICATOR
This comes on as soon as the RG-2's power switch |S
Set to ON to indicate that power i being supplied.
@ DYNAMIC EXPANSION METER
This meter allows you to read out the gain boest with
respect
to the Input signal In cecibels. (See additional
description on page 6).
@ DYNAMIC EXPANSION INDICATORS.
The 4aB, 768, 10dB, 1348, 1646 indicators light up
in accordance with the position of the dynamic expansion
selector.
® PROCESSOR SWITCH
Depress this switch (ON) to produce an expansion effect
with the signals fed from the PROCESSOR INPUT jacks,
The dynamic expansion indicator will come on, and
signals featuring an expansion effect only will be fed out
from the model RG-2's OUTPUT jacks. in the OFF pos:
ton, the RG-2 circuitry is bypassed. This position allows
for instant comparison between the expanded and te un
processed signals
NOTE:
Whon the RG-2' power aitch is set 10 the OFK post
tion and the processor switch Is also set to OFF, the
signal whioh has bypassed the procesior ereuitry is made
valeble ai the OUTPUT jacks, There will, however, be
to output if the input level control is set fo the '0! post
Vian. Make sure that this control te set to the '10 Dost-
TAPE MONITOR SWITCH
Depress this switch to monitor the sound on the tape as it
's being recorded or when playing back a tape using a wpe
deck connected to the RG-2's TAPE jacks. (The tape
'monitor indicator comes on.) Set the switch to OFF when
itor switch isdepressed.
Dynamic Expansion
Dynamic expantion is defined o% the sum of the down
tward expansion (where amail inputs ere expanded down)
'and upland expansion (where lenge impute are expanded
up|. For details, refer 10 "Technical Outline" on pase 7.
@ INPUT LEVEL CONTROL
Use this control to adjust the input level at which the ox
pansion effect is initiated. Clockwise rotation increases
the expansion with rospoct to small signal levels jinereases
expansion sensitivity), Adjust the control for desired
effect according to program source
Advertisement
