Advertisement
CONNECTIONS
CONNECTION DIAGRAM
[eae
Toput | [Outeoe
=r
©
"00108000
Stereo arplitien
'Spear
'Sponker FY
CONNECTIONS TO STEREO AMPLIFIER
Site amolitir
Use the accessory connecting cords to connect the
2
PROCESSOR INPUT and PROCESSOR OUTPUT
Jacks on the RG-2 to the TAPE REC and TAPE
PLAY jacks on a stereo amplifier (Pig. 1). Take
care not to reverse L (left) and R (right) channels,
and make sure connections securely
'TAPE DECK CONNECTIONS
Since the RG-2 is connected to the TAPE REC and
PLAY jacks of the stereo amplifier, a tape recorder
cannot be connected if the stereo amplifier is pro-
vided with only one set of tape jacks. In this case,
connect the input and output jecks of the tape
deck to the TAPE REC and PLAY jacks of the
RG2
Connections for recording
Connect the recording input jacks (INPUT) on the
tape deck to the TAPE REC jacks on the RG.2.
Conneetions for playback
Connect the playback output jacks (OUTPUT) on
the tape deck to the TAPE PLAY jacks on the
RG2
Faaorcng onTaTTOE
'wes
Fig. 1
Advertisement
