Advertisement
Quick Links
Operating Instructions
Bedienungsanleitung
Mode d'emploi
Istruzioni
per uso
English;
Page 1
Deutsch;
Seite 13
Francais;
Page 25
Italiano;
Pag. 37
Thank you for buying this Pioneer product.
Please read through these operating instructions and then you will
know how to operate your model properly. After you have finished
reading the instructions, put them away in a safe place for future
reference.
These operating instructions are based on the model HEM, and they
can be used for the KU, KC, HB, YP, S and S/G models. The dif-
ferences between the models are given below.
HEM. model:
For Europe ('HEM' stamped on packing case): power line voltage
is a.c. 220 Volts v.
KU and KC models:
For U.S.A. and Canada ('KU' or 'KC' stamped on packing case):
power line voltage is AC 120 Volts.
HB model
For U.K. ('HB' stamped on packing case): power line voltage is
a.c. 240 Volts v.
YP model:
For Australia ('YP' stamped on packing case): power line voltage
is a.c, 240 Volts v.
S and S/G models:
For destinations excluding above (S or S/G stamped on packing
case); A 4-point (~ AC 110/120/220/240 Volts) voltage selector
switch is provided.
IMPORTANT
NOTICE
[For KU and KC models]
The serial number for this equipment is located on the rear panel.
Please write this serial number on your enclosed warranty card and
keep in a secure area. This is for your security.
Rear Panel Facilities ...............cccuceuccuseeseceeteaes
CONMECHON
ecicicii eevee cecesscanisee cousstccncscvevsts bist.
Front Panel Facilities ................cceceseeseeeeeeeeees
Operation: ). 2024) ceccedieteaSeecencetenechvcwagvendeseasese
CONTENTS
RG DYNAMIC PROCESSOR
RG-DYNAMIKPROZESSOR
PROCESSEUR
DYNAMIQUE
RG
PROCESSORE
DINAMICO RG
G-60
LINE VOLTAGE SELECTOR SWITCH
Only S and S/G models are provided with this switch but KU, KC and
other models (HEM, HB, YP) are not provided with this switch.
You will find the line voltage selector switch on rear panel. This switch
has positions for 110 V, 120 V, 220 V, and 240 V power sources.
Before your model is shipped from the factory, the switch is set to the
power
requirements
of the destination;
nevertheless,
you
should
check that it is set properly before plugging the power cordinto the
AC outlet. If the voltage is not properly set or if you move to an area
where the voltage requirements differ, adjust the selector switch as
follows. Before adjusting disconnect the power cord.
1. Provide yourself with a medium size screwdriver.
2. Insert the screwdriver into the arrow on the voltage selector and
adjust so that the tip of the arrow points to the voltage value of
your area.
VOLTAGE
SELECTOR
Medium size screwdriver
WARNING: TO PREVENT FIRE OR
SHOCK HAZARD, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR
MOISTURE.
Technical Outline ..........cccccecseseeeceneeerscneeeenens
Effective Operation
.........ccsceeeeceseereteeseenennents
SPECIFICATIONS
...........c
ccc ececeseeeeeuenseeeseesanerer
YPIONEER'
ii
Ge
Eo
(=)
=
=
ol
E
Advertisement
