NRS Healthcare Easylift Home Over-Bed Table User Instructions

S13880 Easylift Home Over-Bed Table
General Safety Warning
Please make sure that you read and follow these
instructions carefully. Keep these instructions in a
safe place for future reference.
1. INTENDED USE
To provide users with a firm, flat surface that is suitable for eating, writing, reading, etc. The single column construction
and adjustable height makes them suitable for use with most types of beds and chairs. This product is NOT suitable
for riser recliner chairs.
S13880
S13880: Easylift Home Over-Bed Table
Suitable for most divan and slatted beds, as well as height
adjustable medical beds.
S13892: Easylift Home Over-Bed / Over-Chair Table
Suitable for most divan and slatted beds, as well as
height adjustable medical beds. It is also suitable for use
with most chairs (excluding riser recliner chairs).
2. SAFETY
WARNING: The central column is spring loaded.
Make sure the central column hand-wheel is in
position & fully tightened before assembly/
disassembly of the table.
WARNING: Do not exceed the safe working load of
25 kg (4 st).
ALWAYS make sure that the table is correctly positioned
and adjusted to allow it to be used safely and comfortably.
DO NOT lean or sit on the table.
DO NOT place hot objects directly on the table surface.
Maximum heat resistance 65°C (149°F).
MAKE SURE the area is clear before moving the table.
TAKE CARE when moving the table over rough or uneven
surfaces. Lift the table over large ridges and wide gaps.
ENTRAPMENT HAZARD: Do not use this product within
318 mm of headboard or other similar object.
ENTRAPMENT HAZARD: Always move the table to a
safe location when the user is sleeping.
USER INSTRUCTIONS
OVER-BED / OVER-CHAIR TABLE
S13892
EASYLIFT HOME
S13892 Easylift Home Over-Bed / Over-Chair Table
3. UNPACKING
Remove the packaging and check all parts carefully.
Contact your supplier immediately if parts are missing or
damaged and do not try and assemble.
3.1 Contents:
6
9
1. Table Top Assembly x 1
2. Central Column Assembly & Inner Rod x 1
Note: Do not remove the PVC anti-rattle sleeves
from either end of the inner rod.
3. Central Column Handwheel x 1
4. Base Assembly x 1 (S13880 only)
5. Base Assembly x 1 (S13892 only)
6. Mushroom Feet x 4
7. M8 x 20 mm Socket Head Button Screws x 4
8. M8 x 40 mm Socket Head Button Screws x 4
9. Castors x 4
10. Allen Key x 1
11. Castor Spanner x 1
1
Safe Working Load
4st
25kg
1
3
7
10
2
4
5
8
11