Rollei 20160 Manual page 49

• PIR lnterval: Defaulted 30seconds, optional from 5seconds ~60minutes
Select the setup period for the camera to wait before it reacts to the
successive triggering of the main sensor alter an animal has first been
detected. The camera does not record any images or videos during the
selected interval. This prevents the memory card from being filled with
unnecessary shots.
@( Note:
• The interval time is short, the camera shooting frequency would be high,
and there would be high consumption of batteries. lt would effect the
usage days of the batteries. lt is just on the opposite ,the interval time is
lang, would be a lower consumption of batteries to guarantee a lang
time usage.
• PIR Sensitivity: High/ Medium/ Low
• Time lapse: Off/On
When "on" has been selected, the camera would automatically take
photos/ videos in the selected time interval, irrespective of whether or not
the PIR sensor has detected a motion or not. This is useful for observing
cold blooded animals e.g. snakes or plants opening up, etc.
As soon as the "On" setting has been confirmed by pressing the OK button,
you can enter the interval time alter which photos/ videos are to be taken.
@( Note:
In this mode, the PIR function would stop working, and the camera
would take photos/ videos in the setting interval time.
• Loop Recording: On/Off
II choose On, the camera will delete the earliest pictures or videos alter the
TF card is full.
• IR LED: Auto/ Medium// Low/ Off
Set the infrared LEDs brightness.
49