Page 1
∗ Refer to the PARTS LIST ∗ DC cord Plastic cabinet assy Mounting hardware assy Lever (E30-4791-05) (A02-1486-13) (J21-9716-03) (D10-4589-04) u163 ∗ Escutcheon Remote controller assy RC-410 Screw set Screw set (A70-2025-05) (N99-1719-05) (N99-1656-05) (B07-3054-02) : KRC-665R only : KRC-665R only...
KRC-665R/591/591V/591Y/591YV MICROCOMPUTER'S TERMINAL DESCRIPTION 3 7 63 1515 0 IC1(SYNTHESIZE UNIT : X14-68XX-XX) Pin No. Pin Name Description Processing Operation TYPE 1 Destination type selection port TYPE 2 Destination type selection port F/E IFC OUT input terminal H: Station exists Vth: 2.5V...
Page 5
KRC-665R/591/591V/591Y/591YV MICROCOMPUTER'S TERMINAL DESCRIPTION 3 7 63 1515 0 Pin No. Pin Name Description Processing Operation P-CON Power control output H: Power ON L: Power OFF CH-RECH Request output to changers L: Request CH-RST Reset output to changers L: Normally...
KRC-665R/591/591V/591Y/591YV TEST MODE 3 7 63 1515 0 • Track jump takes place to the following track when the 1. How to enter the test mode Track up key is pressed. • Reset the unit while holding preset 1 key and preset 3 No.
Page 7
KRC-665R/591/591V/591Y/591YV TEST MODE 3 7 63 1515 0 10. Special display when the display is All ON 2. Enter the security registration mode by pressing the CLK key. If the PRESET key is pressed while all displays are turned 3. Enter the CODE by pressing the Track up/down and AM/ on by ALL OFF, the following display appears.
KRC-665R/591/591V/591Y/591YV ADJUSTMENT 3 7 63 1515 0 BALANCE/FADER/BASS/MID/TREBLE : CENTER T.ADV/METAL/DOLBY NR : OFF INPUT OUTPUT ALIGNMENT ITEM ALIGN FOR FIG. SETTINGS SETTINGS POINTS Adjust so that output Head azimuth TCC-153 level in playing FWD AZIMUTH SP OUT screw 10kHz...
PC BOARD (Component Side View) PC BOARD (Foil Side View) 3 7 6 3 1 5 1 5 0 SWITCH UNIT DAUGHTER UNIT DAUGHTER UNIT SWITCH UNIT SWITCH UNIT SWITCH UNIT (X16-1630-10/1630-11/ (X16-1630-10/1630-11/ X16-1630-10/1630-11/1672-70/ X16-1630-10/1630-11/1672-70/ X89-2510-10/2522-70 (J74-1325-02) X89-2510-10/2522-70 (J74-1325-02) 1672-71 (J74-1315-02) 1672-70/1672-71) 1672-71 (J74-1315-02) 1672-70/1672-71)
(D) ....... 150mm (D) ....... 150mm Weight ........... 1.20kg Weight ........... 1.20kg KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice. u163 US and foreign patents licensed from Dolby Laboratories Licensing Corporation.