Auto Tp Seek Function - Kenwood KRC-685R Instruction Manual

English.
RDS features (See page 6)
Funciton of the KRC-685R/685W
Auto TP Seek Function
Turning Auto TP Seek Function On/Off:
1 Press the MENU button for at least one second.
"MENU" is displayed and the menu mode is turned on.
3 Switching settings
Press either the AM or FM button.
The display and setting will change.
If the traffic information station you are tuned to experiences
4 Press the MENU button to end the menu mode.
Turning News Bulletin Function On/Off:
1 Press the MENU button for at least one second.
"MENU" is displayed and the menu mode is turned on.
2 Keep pressing the I
button until the News Bulletin function
appears in the display.
Press the @<¢ button to search in the other direction.
3 Changing the Function Setting
Press either the FM or AM button.
Each time you press the FM or AM button until the desired
setting is displayed.
Press the FM button to increase the interval, and the AM
button to decrease it.
:
OFF +> 00M + 10M + 20M © 30M + 40M + 50M + 60M o
70M + 80M + 90M
(M= minutes)
When you select the news interruption timeout interval, the
4 Press the MENU button to end the menu mode.
However, the MW/LW band is not returned to when you turn
off the function.
—116—