Hayward ColorLogic LKCUS1100 Owner's Manual page 10

Reysnc -
UCL mode only
Occasionally the Light Controller may have to be re-synchronized with the lights due to a power inter-
ruption or other type of communication error. In that case, press and hold the RESYNC/SPEED button
for 3 seconds. The Light Controller will initiate a re-synchronization process that will re-establish
communication with the pool/spa lights. This may take up to 1 minute.
Factory Reset
To clear all previous settings and return the light to UCL mode, press and hold the SHOW/COLOR and
RESYNC/SPEED buttons for 3 seconds. The Light Controller will indicate a factory reset by blinking
LED 7 (see LED Indicator Codes on page 10).
9
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
Push and hold the
RESYNC/SPEED
button for 3
seconds
Push and hold the
SHOW/COLOR &
RESYNC/SPEED
button for 3
seconds