Operations - Sony Handycam DCR-TRV203 Operating Instructions Manual

-- Advanced Recording Operations --
Photo recording
You can l_eord a still picture like a photograph. This mode is useful when you want to
record a picture such as a photograph or when you print a picture using a video printer
(not supplied).
(1) Set the POWER switch to CAMERA."
(2) In the standby mode, keep pressing PHOTO lightly until a still picture
appears,The CAPTURE indicator appears. Recording does not start yet.
To change the still picture, release PHOTO, select a still picture again, and then
press and hold PHOTO lightly.
(3) Press PHOTO deeper.
The still picture in the view finder or on the LCD screen is recorded for about
seven _-_conds. The sound during tho_e seven seconds is also recorded.
During recording, the image you are shooting appears in the viewfinder or on
the LCD screen.
m
!
o
• During photo recording, you carmot change the mode or setting.
• During photo recording, you cannot turn your camcorder off o_" press the PHOTO
button.
*The PHOTO button does not work:
-while the digital effect function is set or in use.
-while the fader function is in use.
• When recording a still picture, do not shake your eamcorder. The picture may
fluctuate.
To use the photo recording function using the Remote Commander
Press PHOTO in the Remote Commander, Your camcorder record a picture on the LCD
screen or i,n the viewfmder immediately.
To use the photo recording function during normal CAMERA recording
Press PHOTO deeper. The still picture is then recorded for about seven seconds and
your camcorder returns to the standby mode. You cannot select another still picture.
27