Table of Contents
Advertisement
PICTURE MENU
PICTURE SIZE
PICTURE POSITION
ROTATE
ROTATE ALL
PICTURE1
PICTURE2
RESET
*
1
: This function is only available when Raspberry Pi Compute Module Interface Board and Raspberry Pi Compute Module are installed. See
*
2
: This function depends on which Option Board you are using. This function is only available when Option Board is installed.
*
: This function is available only when connecting the optional sensor unit.
3
AUDIO
AUDIO MENU
AUDIO MODE
VOLUME
BALANCE
STEREO/MONO
SURROUND
Sets the Active Picture size.
Press the SET/POINT ZOOM button to adjust the picture size. Press + button or CH/ZOOM+ button to
expand.
Press – button or CH/ZOOM– button to reduce.
NOTE:
•
When [MULTI PICTURE MODE] is set to [2PIP] and [ACTIVE PICTURE] is set to [PICTURE1],
this function is deactivated.
•
When [MULTI PICTURE MODE] is set to [4PBP], this function is deactivated.
Sets the [ACTIVE PICTURE] location.
Pressing the + button moves the Active Picture to the right, and pressing the – button moves it to the left.
Pressing the button moves the Active Picture up, and pressing the button moves it down.
NOTE:
•
When [MULTI PICTURE MODE] is set to [2PIP] and [ACTIVE PICTURE] is set to [PICTURE1],
this function is deactivated.
•
When [MULTI PICTURE MODE] is set to [4PBP], this function is deactivated.
Sets the multi-screen rotation.
NOTE:
•
The [POINT ZOOM] function will not work if this function is enabled.
•
This function is canceled when [DisplayPort VERSION] in [DisplayPort1] is set to [1.4] or
[SCREEN SAVER] is set to [MOTION] or [IMAGE FLIP] is set to [NONE].
•
If input signal is Interlaced signal this function is disabled.
•
If input is DisplayPort 4K (60 Hz) 10bit, this function is disabled.
Rotate all pictures.
Rotates [PICTURE1].
Rotates [PICTURE2].
Resets all PICTURE settings back to factory settings except for [PICTURE MODE] and [SPECTRAVIEW
ENGINE].
Provides pre-configured audio settings suitable for various environments where this device may be used,
or customize settings to viewer preference.
NATIVE: Standard setting.
RETAIL: Surround sound for clarity of audio in retail stores.
CONFERENCING: Optimized settings for clarity of audio in conference rooms.
HIGHBRIGHT: Lowest volume level in order to focus on the visual message (audio is mute).
TRANSPORTATION: Lowest volume level in order to avoid disturbance in public spaces (audio is mute).
CUSTOM: Customizable settings.
Increase or decrease output volume level.
Select [STEREO] or [MONO] for the audio output.
STEREO: Independent audio channels for routing audio signal. Sound balance between the left and right
speakers can be adjusted.
- Press the + button to move the audio signal to the right.
- Press the – button to move the audio signal to the left.
MONO: Audio signals are routed through a single audio channel. Balance cannot be adjusted and the
slider will be unavailable.
Artificially produces surround sound audio.
NOTE:
[LINE OUT] is disabled when this function is set to [ON].
English−96
page
84.
Advertisement
Table of Contents
