Download  Print this page

NEC PlasmaSync 42XC10 Installation Manual

42"
Hide thumbs
   

Advertisement

P42XC10 Installation Guide
42" Plasma Display
Contents:

Product Description

Type:
Plasma Display
Resolution:
1024x768
Aspect Ratio:
16:9
This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not intended to
be a step-by step procedure for installation.
Any ceilings or walls must be strong enough to support the display and the installation must be in accordance with any local
building codes. All mounts should make secure contact to wood studs.
4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally to
fill the screen using the menus (see "Aspect Modes" in menus and user manual).
Distances are in inches, for millimeters multiply by 25.4.
Distances may vary ±5%.
Maximum Tilt Angles
Below are the maximum angles that the display can be tilted in both landscape and portrait mode
Landscape 20°
Portrait 20°
www.necvisualsystems.com
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9, 10
Screen Surface: Anti-Reflective
Dimensions:
Weight:
FCC:
P42XC10
40.79"(W) x 25.55"(H) x 5.10"(D)
76.1 lbs
Class B
Rev 1.0
Page 1 of 10

Advertisement

Table of Contents
loading

  Related Manuals for NEC PlasmaSync 42XC10

  Summary of Contents for NEC PlasmaSync 42XC10

  • Page 1: Table Of Contents

    Distances may vary ±5%. Maximum Tilt Angles Below are the maximum angles that the display can be tilted in both landscape and portrait mode Landscape 20° Portrait 20° www.necvisualsystems.com NEC Corporation of America Page 1 Page 2 Page 3 Page 4 Page 5...
  • Page 2: Ventilation Requirements

    NOTE: The ventilation space should not be covered or closed off at the front of the opening. If for some reason the opening needs to be covered, other means of ventilation will need to be incorporated into the design. Contact NEC for design review and recommendations.
  • Page 3: Display Dimensions

    NEC Corporation of America Visual Systems Division P42XC10 Installation Guide 42” Plasma Display Rev 1.0 Display dimensions www.necvisualsystems.com P42XC10 Page 3 of 10...
  • Page 4: Rear

    NEC Corporation of America Visual Systems Division P42XC10 Installation Guide 42” Plasma Display Rev 1.0 Display dimensions (cont.) www.necvisualsystems.com P42XC10 Page 4 of 10...
  • Page 5: Display Dimensions W/Optional Speakers And Stand

    NEC Corporation of America Visual Systems Division P42XC10 Installation Guide 42” Plasma Display Rev 1.0 Dimensions with optional speakers and stand www.necvisualsystems.com P42XC10 Page 5 of 10...
  • Page 6: Optional Stand Dimensions

    P42XC10 Installation Guide 42” Plasma Display Optional Speakers and Stand Dimensions Table Top Stand ST-P42C1 www.necvisualsystems.com NEC Corporation of America Visual Systems Division P42XC10 Page 6 of 10 Rev 1.0...
  • Page 7: Optional Speakers Dimensions

    P42XC10 Installation Guide 42” Plasma Display www.necvisualsystems.com NEC Corporation of America Visual Systems Division Optional Speakers SP-P42P1 P42XC10 Rev 1.0 Page 7 of 10...
  • Page 8: Connections

    NEC Corporation of America Visual Systems Division P42XC10 Installation Guide 42” Plasma Display Rev 1.0 Connections Located at Bottom of Display Control Buttons www.necvisualsystems.com P42XC10 Page 8 of 10...
  • Page 9: Pc Control

    'CR' '0'-'0' 'CR' '0'-'0' 'v'-'P' 'CR' '0'-'0' 'v'-'I' 'CR' '0'-'0' 'v'-'M' 'CR' Command1 Command2 Data length NEC Corporation of America Visual Systems Division Data length Data Notes Message STX-'B'-'1'-ETX STX-'B'-'E'-ETX Item OP code page V-POSITION H-POSITION V-HIGHT H-WIDTH CLOCK PHASE...
  • Page 10: Rev 1.0

    NEC Corporation of America Visual Systems Division P42XC10 Installation Guide 42” Plasma Display Rev 1.0 PC Control Connector (D-Sub 9P) NOTE: The only connections required are pins 2 (RxD), 3 (TxD) and 5 (GND). www.necvisualsystems.com P42XC10 Page 10 of 10...

This manual is also suitable for:

P42xc10