Table of Contents
Advertisement
Self Clean
PROBLEM
During
, the
SELF CLEAN
oven is louder than usual.
The screen shows no time
remaining but the oven
door will not open.
I have cancelled
SELF
but cannot use the
CLEAN
oven:
•
the door will not open
•
the screen is still
counting down or
showing no time
remaining
•
the controls are
unresponsive
The oven screen shows A2
or A3.
There is a power cut
during
.
SELF CLEAN
Excessive smoking and/
or flames inside the oven
during a CLEAN cycle.
Brief glowing inside the
oven during
SELF CLEAN
The dial halos on the
secondary oven flash
white.
The oven door won't open
TROUBLESHOOTING
POSSIBLE CAUSES
This is normal: the oven's cooling
fans operate at their highest speed.
The oven door is locked because the
oven is still too hot to be used for
cooking.
This is normal.
If the oven is still too hot to be
used for cooking the door will stay
locked until it has cooled down.
See 'Alert codes' for instructions.
Power cut.
Combustible material (eg wooden
board or utensil) or excessive food
soils left in the oven.
Heavy soiling is being removed.
.
is running in the
SELF CLEAN
main oven.
The door is locked because
cycle is underway or the oven
CLEAN
has not yet cooled.
WHAT TO DO
Wait until
If you cancelled a cycle part way
through, the oven
still needs to cool down before it
can be used. The oven door will
automatically unlock.
Wait until the cool-down phase has
finished. A long tone will sound and
the oven door will automatically
unlock when the oven is ready to
use.
Depending on when the clean cycle
was cancelled, the cool-down may
take up to 45 minutes.
Follow the instructions on
the screen.
The heating elements are
disabled while the door is open.
The door will remain locked until
the oven has cooled to a safe
temperature.
Follow the instructions under 'Self
Clean' Do not disconnect the range
from the power supply at the circuit
breaker. The cooling fan is needed
to cool the range.
This is normal and requires
no action.
Wait until the
finished or follow the instructions in
'Using Self Clean'.
See instructions in 'Using Self Clean'.
SELF
has finished.
SELF CLEAN
cycle has
SELF CLEAN
77
Advertisement
Table of Contents
