Table of Contents
Advertisement
Presetting the Active Channels
This VCR can receive VHF channels 2 to 13, UHF channels 14 to
69 and CATV channels 1 to 125. These channels can be preset using
the Remote Commander and the TUNER PRESET display. First, you
should preset the active channels in your area using the automatic
preset mode. Then, if there are any unwanted channels, disable them
manually. tf you have already decided which channels you wish to
preset on the VCR, set them directly using the channel number
buttons.
Before You Begin
Before presetting channels, check the following points:
¢ Turnon the VCR and the TV.
e If you have connected the TV and the VCR using the VHF/UHF
OUT on the VCR only, make sure that the TV is set to the correct
channel (3 or 4) for the VCR.
¢ Press TV/VTR to display the VTR indicator in the display window
on the VCR.
¢ Press INPUT SELECT so that the TUNER indicator and the
channel number appear in the display window on the VCR.
e Use A and ¥ to move the cursor (>).
e Use 4 and P to select the items.
¢ To quit setting in the middle of the procedures, press MENU.
Presetting All Receivable
Channels Automatically
1 Press MENU.
The main MENU appears.
2 Press 4 or ¥ to move the cursor (>) to
TUNER PRESET.
3 Press EXECUTE.
The TUNER PRESET menu is displayed.
4 Press & or ¥ to move the cursor to
NORMAL/CATV.
5 Press <or ® to select NORM or CATV.
NORM presets the VHF and UHF
channels; CATV presets your cable TV
channels. The lowest channel number 2
for NORM, and 1 for CATV, will appear on
the screen.
6 Press A or ¥ to move the cursor to AUTO
PRESET.
7 Press EXECUTE.
Receivable channels preset in numerical
sequence. When no more channels can
be found, the presetting stops and the
picture of the lowest numbered channel is
displayed on the TV screen.
Presetting the Active Channels | 19
Advertisement
Table of Contents
