Slow Motion Playback; Adjusting Tracking During Variable Speed Playback - Sony Video 8 EV-A50 Operating Instructions Manual

Notes
¢ If the tracking bar 1s shifted too much,
noise in the picture becomes too unstable
to adjust. In thus case, reset to the center.
© If the VCR ts in stop mode, the tracking bar
will not appear on the TV screen. Since
you cannot adjust tracking, put the VCR in
slow motion playback mode, still mode or
x2 speed playback mode to adjust tracking.
© Itis necessary to adjust tracking for both
the SP and LP modes.
36; Variable Speed Playback
Slow Motion Playback
Using the VCR:
Slowly turn the DUAL MODE SHUTTLE ring clockwise (in the foward
direction) or counterclockwise (in the reverse direction) until the SLOW
(forward slow motion playback) or - SLOW (reverse siow motion playback)
indicator appears on the TV screen.
To return to normal playback
Release your fingers from the ring.
Using the Remote Commander:
Press I> SLOW.
To play back in the reverse direction
Press -.. DIRECTION.
To resume the forward direction
Press DIRECTION -.
To return to normal playback
Press » PLAY.
Adjusting Tracking During
Variable Speed Playback
This adjustment works during only still picture, slow motion playback and
x 2 speed playback.
1 Press MENU.
The main MENU appears.
2 Press A or ¥ to move the cursor to TRACKING
ADJUST.
3 Press EXECUTE.
The TRACKING ADJUST menu appears.
4 Press A or ¥ to move the cursor () to the item you
want.
5 Press <4 or > to move Bin the tracking bar so that
you will obtain the best possible picture on the
screen,
6 Press EXECUTE.
The TRACKING ADJUST menu disappears.
Shit this until you obtain
the best possible prcture
Tracking bar