Presetting The Active Channels; Presetting All Receivable Channels Automatically - Sony SLV-585HF Operating Instructions Manual

Presetting the Active Channels
This VCR is capable of receiving VHF channels 2 to 13,
UHF channets 14 to 69, or CATV channels 1 to 125.
These channels can be preset using the Commander and
the TUNER PRESET display. First, we recommend that you
preset the active channels in your area using the automatic
preset mode. Then, if there are any unwanted channeis,
delete them manually. If you've already decided which
channels you wish to preset on the VCR, set them directly by
using the channel number buttons.
Presetting All Receivable Channels Automatically
.. Use dm and Y to move the cursor.
Use < and to select the tems.
DrineR SETsCHECK
Mose set
TONER PRESET
Croce SET
16 [r=
Before presetting channels, check the following points.
Tum on the VCR and the TV.
© If you've connected the TV and the VCR using the
VHF/UHF OUT on the VCR only, make sure that the TV is
set to the correct channel (3 or 4) for the VCR.
© Press ANT TV/VTR to display the VTR indicator.
© Press INPUT SELECT so that the TUNER indicator and
channel number appear in the display window.
2 Press dor Y to move the cursor (P ) to TUNER
PRESET.
neay
TOMER SET /CHECK
WOsE SET
OTERER PRESET
Croce set
3 Press EXECUTE.
The TUNER PRESET display appears.
TERER PRESET 2cu
BORRsICATY
AVTO PRESET
Dmanvar SET AOD ERASE
+6
omeRne CATY
att
Fie Tentag
4 Press & or Y to move the cursor to NORMALICATV.
TONER PRESET 2¢n
PRORN/CATY «HORN CaTY
Aete PRESET
WARBAL SET ADO ERASE
Al on Off
FERE TunsNs