Table of Contents
Advertisement
Setting the Time and Date
If "=: -=" lights up on the unit
if the power is interrupted for more than one hour,
"=; =~" lights up in the display when the power is
restored. You will have to reset the date and clock
again.
When the time and date clock is disptayed
The clock keeps running as fong as no changes are
made. The seconds are not reset to 00 when you
return to the onginal screen.
You cannot set the time and date during timer-
activated recording, timer recording standby,
quick ~ timer recording or sleep-timer.
18 | Setting the Time and Date
You can set the time and date between years 1992 and 2007 on the TV
screen using the Remote Commander.
Before You Begin
Use A or ¥ to move the cursor (>).
Use < or m to select the items.
The day of the week is automatically set after the date is set.
To quit setting in the middle of the procedures, press MENU.
Example of Time and Date Setting
Example: To set to 9:30 am, July 4, 1992
vew
> °MER SET Coe
cp an
1 Press MENU.
The main MENU appears.
2 Press A or ¥ to move the cursor (P) to
CLOCK SET.
3 Press EXECUTE.
"1/1/1992 WED 12:00AM " is displayed.
The leftmost 1, in the "month" position,
flashes.
4 Press a or ¥ until 7 appears in the month
position.
5 Press » to make the next number blink in
the "day" position.
Time (hour and minute}
6 Press A or ¥ until 4 appears in the day
Seton
8"
7 Press > to make the year flash and press A
to change the year.
8 Press P to make the time flash.
9 Press & or ¥ until 9 AM appears.
10 Press P to make the minute flash.
11 Press A or ¥ until 30 appears in the minute
position.
12 Press EXECUTE at the same time that you
hear the time signal.
Pressing EXECUTE will set the clock to
9:30 am 00 seconds.
Advertisement
Table of Contents
