During Playback - Sony Video 8 EV-A50 Operating Instructions Manual

SEPAUSE W®STOP
COUNTER @REC DUALMODE
RESET SHUTTLE ring
CHANNEL +/-
Note
The picture may be distorted a moment at the
cut-out point (recording end point).
During Playback
You can re-record onto an unwanted portion of a pre-recorded cassette
using the DUAL MODE SHUTTLE ring on the VCR.
1 Press if! PAUSE at the end of the unwanted scene during playback.
The VCR enters playback pause mode.
2 Press COUNTER RESET to set the linear counter to "OHOOMO0S".
3 Turn the DUAL MODE SHUTTLE ring on the VCR until the beginning of
the unwanted scene appears on the screen.
When you release the ring, the VCR enters playback pause mode. Use
< DIRECTION > on the Remote Commander to rewind or advanced the
picture frame by frame for searching more specific points.
4 Press @ REC.
The VCR enters recording pause mode.
5 Select a new program for re-recording.
Select the channel or change the input by pressing CHANNEL + /— or
INPUT SELECT on the Remote Commander.
6 Press {1 PAUSE when the scene to be recorded begins to appear on the
screen.
Recording begins.
7 Press #& STOP when the linear counter shows "OHOOMO0S".
Cutting out the Unwanted Scenes - SHUTTLE EDIT | 41