Kenwood TS-950SDX Instruction Manual page 44

Hide thumbs Also See for TS-950SDX:

Note

4-6-1. Data Entry

Note

electronic keyer or key.

Connect a paddle to the rear panel CW KEY jack.

1. Set the MODE key to CW.

3. Set the VOX/MAN switch to MAN.

Set the FULL/SEMI switch to SEMI.

5. Press the REC1, REC2, or RECS key.

Example: When the REC1 key is pressed.

6. When a CW message is sent with the paddle, it is

automatically stored into memory.

7. When the CLR key is pressed, memory storage is

terminated, and the transceiver returns to normal.

Note

180

100

characters,

memory

storage

is,

| normal state.

4-6-2. Playback Method

Connect a paddle to the rear panel CW KEY jack.

1. Select the receive mode.

2. Set the VOX/MAN switch to MAN.

3. Set the REC/PLAY switch on the Quick Key board

to PLAY.

Example:

When the REC1 key is pressed.

Note

4-6-3. Transmitting a Message

H In the receive mode

4. Set the VOX/MAN switch to VOX.

E In the transmit mode

Press the desired PLAY key to start transmission.

4-6-4. Continuous Playback"

continuously.

When PLAY1 transmission is completed.