Pioneer SX-2300 Operating Instructions Manual page 3

OF THESE SWITCHES
LINE VOLTAGE SELECTOR SWITCH
Only multi-voltage models are provided with this
models are not provided with this switch.
Mains voltages in Saudi Arabia are 127V and 220V
only. Never use this model with 110V setting in Saudi
Arabia.
The line voltage selector switch is on the rear panel. Before
your model is shipped from the factory, this switch is set to
the power requirements of the destination. Check that it is
set properly before plugging the power cord into the AC
outlet. If the voltage is not properly set or if you move to an
area where the voltage requirements differ, adjust the selec-
tor switch as follows.
4. Use a medium-size screwdriver.
2. Insert the screwdriver into the groove on the voltage
selector, and adjust so that the tip of the groove points to
the voltage value of your area.
Medium-size
screwdriver
2204 240¥
10v 120-127
CHANNEL STEP SWITCH
Only multi-voltage models are provided with this switch.
U.S., Canadian, European, U.K., and Australian models are not
provided with this switch.
Before your model is shipped from the factory, the switch is
set to the channel allotment plan of the destination; never-
theless, you should check that it is set properly before use.
If the switch is set to the wrong position, figures on the fre-
quency display will not come to a stop with FM or AM tuning.
NOTE:
Contact your dealer for more information if you are not sure about
the channel allotment plan in your area.
CHANNEL STEP
ears FM- a
a -AM- =
Other ea North and South America
CHECKING ACCESSORY ITEMS
FM T-type Antenna AM Loop Antenna
AM loop antenna construction
* Unfold all four legs of the AM loop antenna toward the out-
side, and insert the stopper inside the legs into the hole in
the AM loop antenna to fix it in position.
Leg
3
<LARB1094 >