Pioneer SX-2300 Operating Instructions Manual page 2

CAUTION
RISK OF ELECTRIC SHOCK
DO.NOT OPEN
CAUTION:
if the apparatus is fitted with AC mains power out
jet(s). see REAR PANEL FACILITIES for convenient
connection of additional Hi-Fi component(s). Make
all connections to the AC outlet(s) and the signal
terminals first. Connect the plug to the wall socket
last, make sure that the power switch is off. Discon-
nect the wall plug when the equipment is not in
(regular) use, e.g. when on vacation
Blue Neutral
Brown Live
Ag the colours of the wires in the mams jead of this
apparatus may fot correspond with the coloured
marking identitying the terminals in your plug proceed
as follows
The wire which Is coloured blue must be connected to
the terminal which is marked with the letter Noor
coloured black
The wire which 1s coloured brown must be connected
to the terminal which is marked with the letter Lor
coloured red
Equipment sold in the U.K. is not supplied with
a power plug.
READ INSTRUCTIONS All the safety and
operating instructions should be read before the
appliance is operated
RETAIN INSTRUCTIONS — The operating instruc:
tions should be retained for future reference
HEED WARNING — All warnings on the appliance
'and in the operating instructions should be
adhered to.
instructions should be followed.
WATER AND MOISTURE —-: The appliance should
not be used 'near water
for example,
near 4
bathtub, washbowl., kitchen sink, iaundry tub, ina
wet basement, or near a swimming pool, etc
shauld not be mounted to a wail or ceiting.
HEAT —- The appliance should be situated away from
heat sources such as radiators, heat registers.
stoves, of other appliances (including amplifiers)
that produce heat.
POWER SQUACES~- The appliance should be
connected to a power supply only of the type
described in the operating instructions or as
marked on the appliance.
CLEANING -- The appliance should be cleaned onty
with a polishing cloth or a saft dry cloth. Never
clean with furniture wax, benzine, insecticides or
other volatile fiquids since they may corrode the
cabinet.
SERVICE ENTRANCE
EQUIPMENT
POWER SERVICE
GROUNDING
{0.g. intorioe metal water pipe)
FIG. " a
® ©The appliance has been exposed to tain, oF
mance; oF
service the appliance beyond that described m the
operating instructions.
For all other servicing
contact the nearest Pioneer authorized service
center
POWEFL LINES
SERVICE
ENTRANCE
ONDUCTORS»
CTRODE SYSTEM
GRO
SONDING
JUMPER d
NEC
SROLNO
NDING.
SE
GUTDOOR ANTENNA GROUNDING -~ Han out
side antenna ts connected to the antenna termu-
pal, be sure the antenna system is grounded so as
to provide some protestian against voltage surges
i built up static charges.
in the U.S.A. section 810 of the Nauonal El
trical Code, ANSI/NFPA No 70-1984, providet
information with respect 10 proper grounding of
the mast and supporting structure, grounding of
the lead-in wise to an antenna discharge unit, size
ef grounding
conductors. location of antenna
discharge unit, connection to grounding elec:
pe (84 mm*) aly
minum, No. 17 AWG (1.0 mm*)
copperslad steal, bronze wire, or
larger as ground wire
hy Secure antenna lead-in and
ground wires to house with
stand-off insulators spaced from
4 feet (1.22 meters) to 6 feet
(1.83 meters) apart.
c) Mount antenna discharge unit as
closely as possible to where lead
in enters house.
Use jumper wire not sitaiter tan
No.6 AWG (13.3 mr*) copper.
on the equivalent, when a sepa
rate antenna-grounding electrode
is used
See NEC Section 810-2
STANDOFF dj
INSULATORS b
NTENNA
EAD-IN WIRE
TO EXTERNAL ANTENNA
TERMINALS OF PRODUCT
ANTENNA,
OPTIGNAL ANTENA
E
W DRIVEN 8 FEET
he— INTO THE EARTH
HIF REQUIRED BY
LOCAL CODES SEE
CHON 818.21 (8
i" DISCHARGE UNIT ©
GROUND
WIRE ab
2
<ARB1094>