Post Behavior; Manageability - Dell OptiPlex 7060 Tower Setup And Specifications Manual

Post behavior

Table 26. POST Behavior
Option
Numlock LED
Keyboard Errors
Fast Boot
Extend BIOS POST Time
Full Screen Logo
Warnings and Errors

Manageability

Table 27. Manageability
Option
USB provision
MEBx Hotkey
Description
Allows you to enable or disable the Numlock feature when your computer starts. This option is
enabled by default.
Allows you to enable or disable the keyboard error reporting when the computer starts. The option
Enable Keyboard Error Detection is enabled by default.
This option can speed up the boot process by bypassing some compatibility steps:
• Minimal — The system boots quickly, unless the BIOS has been updated, memory changed, or
the previous POST did not complete.
• Thorough — The system does not skip any steps in the boot process.
• Auto — This allows the operating system to control this setting (this works only when the
operating system supports Simple Boot Flag).
This option is set to Thorough by default.
This option creates an additional pre-boot delay.
• 0 seconds (default)
• 5 seconds
• 10 seconds
This option will display full screen logo if your image match screen resolution. The option Enable Full
Screen Logo is not set by default.
This option causes the boot process to only pause when warning or errors are detected. Choose any
one of the option:
• Prompt on Warnings and Errors (default)
• Continue on Warnings
• Continue on Warnings and Errors
Description
This option is not selected by default.
This option is selected by default.
System setup 25