Table of Contents
Advertisement
5 Change projector
settings
This section helps you change the projector
settings using the settings menu.
1
Press
on the remote control to access
the projector's settings menu.
Use the navigation buttons and the OK
2
button to select a menu item. Press
return to the previous level of the menu
tree.
3
Press
/
or / to select a value for the
menu item.
Press the OK button to make the change.
4
Note: For some menu items such as Digital
Zoom, the change takes effect once you
select a different value.
5
Press
to exit the projector's settings
menu.
Input source settings
You can view and change the following input
source settings.
EasyLink (CEC)
HDMI Mode
•
EasyLink (CEC): Choose to enable or
disable HDMI™ CEC (Consumer Electronics
Control). The default value is Enabled.
•
HDMI Mode: Choose which HDMI™ mode
to use.
•
Normal (Video): Use the normal video
range (16-235) commonly used with
most media devices.
•
Extended (PC): Use the extended video
range (0-255) used with PC devices.
12
Picture settings
You can view and change the following picture
settings.
to
•
Picture Mode: You can set the projector
to use the following picture modes,
depending on your viewing environment or
preferences. After selecting a picture mode,
you can modify its settings.
•
Standard: Display the picture with
normal brightness, contrast, saturation,
hue and sharpness levels.
•
Vivid: Sharpen the image by increasing
the contrast, saturation and sharpness.
•
Movie: Optimize the settings for movies.
•
User: Define your own settings.
•
Color Temperature: You can set the
projector to use the following color
temperature types. After selecting a color
temperature type, you can modify its
settings.
•
Cool: Make the picture more bluish.
•
Standard: Use a moderate color
temperature.
•
Warm: Make the picture more reddish.
•
User: Define your own settings.
•
Brightness: Adjust the screen's overall
brightness.
•
Contrast: Adjust the contrast of the bright
and dark areas of the image.
•
Saturation: Adjust the intensity of the
colors.
•
Hue: Adjust the hue of the colors.
•
Sharpness: Adjust the sharpness of the
image.
•
Red Gain: Adjust the gain for red.
•
Green Gain: Adjust the gain for green.
•
Blue Gain: Adjust the gain for blue.
•
Noise Reduction: Turn off noise reduction
or set its level to Low, Middle or High.
•
Reset to Default: Select Yes to reset all the
picture settings above.
Philips · NeoPix 330
Advertisement
Table of Contents
