Table of Contents
Advertisement
8 Change projector
settings
This section helps you change the projector
settings using the Quick Settings panel, More
Settings screen and settings menu.
Change settings using
Quick Settings panel
1
From the home screen, open the Quick
Settings panel by pressing
projector/remote control one or more times.
2
Select a setting on this panel using the
navigation buttons and the OK button.
3
Make changes using the navigation buttons
and the OK button.
4
Press
one or more times to return to the
home screen.
The following settings are available on this
panel:
•
Input Source: Toggle the input source
between Built-in Android (Philips OS) and
HDMI.
•
AirPlay™: View and change the settings for
AirPlay. To learn how to wirelessly mirror the
screen of an iOS device or Mac computer
using AirPlay, see Wireless projection with
iOS devices/Mac computers, page 21.
•
Miracast™: Wirelessly mirror the screen of
an Android device or Windows computer.
For more details, see Wireless projection
with Android devices/Windows computers,
page 20.
•
WiFi: Access the Wireless Network screen.
To learn how to connect the projector to
a Wi-Fi network, see Step 3: Connect to a
Wi-Fi network, page 11.
•
Bluetooth: Access the Bluetooth screen. To
learn how to connect a Bluetooth device,
see Connect to a Bluetooth device, page
22
•
•
on the
•
•
•
Change settings using More
Settings screen
1
2
3
4
16.
Image: Access the Image Settings screen.
The following settings are available:
•
Projection Direction: Adjust the
projection to the correct direction based
on how the projector is installed.
•
Keystone Correction: See Keystone
below for details.
•
Digital Zoom: See Digital Zoom below
for details.
Keystone: Access the Keystone Correction
screen. The following settings are available:
•
Auto Keystone Correction: Turn auto
keystone correction on or off by
pressing the OK button.
•
4-Corner Correction: Select this to
manually make the image rectangular
by moving four corners of the image.
This setting is visible only when auto
keystone correction is off.
•
H/V Correction: Select this to manually
make the image rectangular by
adjusting the horizontal and vertical
keystone angles. This setting is visible
only when auto keystone correction is
off.
Digital Zoom: Scale down the screen to up
to 60% of its full size. The default value is
100% (no scale-down).
Power: Access the Power screen. The
following settings are available:
•
Shutdown: Select this to turn off the
projector immediately.
•
Timed Shutdown: Select this to turn off
the projector after a specific period of
time.
Change Wallpaper: Change the wallpaper
for the home screen by selecting one of the
pictures offered by the operating system.
From the home screen, open the More
Settings screen by selecting
upper-right corner of the screen.
Select a setting using the navigation buttons
and the OK button.
Make changes using the navigation buttons
and the OK button.
Press
one or more times to return to the
home screen.
near the
Philips · NeoPix 320
Advertisement
Table of Contents
