Related Manuals for Philips NeoPix Start
Summary of Contents for Philips NeoPix Start
- Page 1 EN User Manual FR Manuel utilisateur DE Bedienungsanleitung ES Manual del usuario NeoPix Start IT Manuale d’uso Mini projector Register your product and get support at www.philips.com/support...
- Page 2 User Manual NeoPix Start Mini projector Register your product and get support at www.philips.com/support...
-
Page 3: Table Of Contents
Table of contents Introduction ..........3 7 Service ..........14 Dear customer ...............3 Cleaning .................14 About this user manual ..........3 Update software ............14 What’s in the box ............3 Troubleshooting ............16 General safety information ....4 8 Appendix ..........17 Setting up the product ..........4 Technical data ............. -
Page 4: Introduction
Introduction What’s in the box NeoPix Start projector (NPX240) A/C power adapter Dear customer Remote control with 2 AAA batteries Thank you for purchasing this projector. Quick Start Guide We hope you enjoy this product and the many Power plugs (EU, UK, US) -
Page 5: General Safety Information
Have your product checked by product. an authorised service centre. Keep the product Do not remove the type label from this product, away from open flames (e.g. candles). as this will void the warranty. Philips · NeoPix Start... -
Page 6: Power Supply
2 Overview Power supply Use only a power adapter which is certified for this product (see Technical data, page 17). Top view Check whether the mains voltage of the power supply matches the mains voltage available at the setup location. This product complies with the voltage type specified on the product. -
Page 7: Side View
Switch the product on or to standby. Connect to a Micro SD card for media play. • When the product is switched on, the LED turns green. When the product is in standby, the LED turns red. Philips · NeoPix Start... -
Page 8: Access Home Menu
3 Initial operation Access home menu The home menu provides easy access to media player, setup and other useful features in the Placing projector projector. You can install the projector in four different Press . The home menu is displayed. configuration. -
Page 9: Changing Screen Size
• The LED on the projector turns red. To adjust projection to the correct position, press , and go to SETUP - Panel Flip MICRO SD Rotate. Philips · NeoPix Start... -
Page 10: Preparing The Remote Control
Preparing the remote Power on and setup control Press to turn on the projector. The LED on the projector turns from red to green. CAUTION! • To turn off the projector, press again. The improper use of batteries can lead The LED on the projector turns from to overheating, explosion, risk of fire and green to red. -
Page 11: Connect To Playback Devices
Using a RCA cable with 3.5 mm plug, connect the AV connector (3.5 mm) on the projector to the analogue audio output Philips · NeoPix Start... -
Page 12: Media Playback
5 Media playback MICRO SD This section helps you use the projector to play media from a wide range of sources. Notice The projector supports a USB storage device that is formatted for FAT16 or FAT32 file systems. Movie playback Supported file formats When connecting to the headphones, use The following file formats are supported:... -
Page 13: Music Playback
MOVIE: access and play video files only. • If photo media player is selected, • PHOTO: access and play photo files only the playable photo files can be only. displayed. Select MUSIC to activate music media player and access music files. Philips · NeoPix Start... -
Page 14: Change Settings
6 Change settings Select a photo file and press OK to start slide show. The playback control icons are displayed This section helps you change the settings of the at the bottom of the projection screen. projector. You can access the following playback functions. -
Page 15: Restore Default Settings
Update software Set auto sleep The latest software of the projector can be found on www.philips.com/support for you Set a time length so that the projector turns off to get the best features and support from the automatically after a period of time of inactivity. - Page 16 • Make sure the unzipped file name is “GXY_MELODY.bin” or “GXY_ MELODY_64.bin”. Turn off the projector, then connect the USB flash drive to the projector. Turn on the projector, then the upgrade starts automatically. The LED on the projector blinks during upgrade. Wait about 15 seconds.
-
Page 17: Troubleshooting
What to do if the projector does not work • Check that the HDMI cable is plugged correctly. when connecting to a notebook PC? • Make sure that the notebook PC has been switched to projector display. Philips · NeoPix Start... -
Page 18: Appendix
Optical technology ..........LCD Light source ..........RGB LED Package content Resolution ........240 × 320 pixel NeoPix Start projector, remote control with 2 AAA batteries, AC adapter, power plugs (EU, LED lifetime ........up to 20,000 h UK, US), Quick Start Guide Contrast ..............60:1... - Page 19 The Declaration of Compliance can be this device must accept any interference consulted on the site www.philips.com/ received, including interference that may projection. cause undesired operation. FCC RF Radiation Exposure Statement: Preservation of the environment as part...
- Page 20 Screeneo Innovation SA/PHILIPS products or Screeneo Innovation SA/PHILIPS approve d products. Screeneo Innovation SA shall not be held liable...
- Page 21 PHILIPS and the PHILIPS’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. used under license. This product was brought to the market by Screeneo Innovation SA., further referred to in this document as Screeneo Innovation SA., and is the manufacturer of the product.