Bosch SH 87PW55N Series Operating Instructions Manual page 14

en-us Water softening system / special salt
Adjusting the water softener settings
Using the test strip included with
your dishwasher
(Purchased test strips may have a
different scale)
Adjusting the water
softening system
The amount of salt dispensed can be
set from •:‹‹ to •:‹ˆ. Salt is not
required at the set value •:‹‹.
Set the softening system as follows:
Ask your local water utility
1.
company for the water hardness
value of your tap water or use test
strip.
Required setting can be found in
2.
the water hardness table.
Press On/Off button (.
3.
Hold down function key # and
4.
press Start button P until the
display 8 indicates •:‹x (x can
be any number).
Release both buttons.
5.
The indicator of function key #
flashes and the display 8
indicates •:‹‹. Press function key
3 to select the desired setting.
Press Start button P to save
6.
the setting.
The chosen setting has now been
stored.
14
Water Add salt to
softener salt
setting dispenser
No
•:‹‹
Yes
•:‹‚
Yes
•:‹ƒ
Yes
•:‹„
Yes
•:‹...
Yes
•:‹†
Yes
•:‹‡
Yes
•:‹ˆ
Water hardness conversion chart
(only necessary if you purchase a
different test strip)
ppm
0 116 0
117 152 7
153 188 9
189 223 11
224 294 14
295 383 18
384 544 23
545 890 32
gpg/°dH
6
8
10
13
17
22
31
52