Using The Usb Floppy Disk Drive; Connecting The Usb Floppy Disk Drive - Toshiba Qosmio G10-105 User Manual

You can also tap the Touch Pad to perform functions similar to those of the
left button.
Click: Tap once
Double-click: Tap twice
Drag and drop: Tap to select the material you want to move. Leave
your finger on the Touch Pad after the second tap and move the
material.

Using the USB floppy disk drive

The USB floppy disk drive connects to one of the computer's USB ports. It
accommodates 1.44-megabyte or 720-kilobyte floppy disks. Refer to
Chapter 2,

Connecting the USB floppy disk drive

To connect the drive, plug the floppy disk drive's USB connector into one of
the computer's USB ports. Refer to figure below.
Make sure the connector is right side up and properly aligned with the
socket. Do not try to force the connection; doing so can damage the
connecting pins.
If you connect the floppy disk drive after turning on the computer, it will take
about 10 seconds for the computer to recognize the drive. Do not
disconnect and reconnect before 10 seconds has elapsed.
User's Manual
The Grand Tour, for more information.
USB connector
Connecting the USB floppy disk drive
Operating Basics
USB port
4-2