Toshiba Qosmio G10-105 User Manual page 134

I
If only a supervisor password is set, please note the following.
I
I
I
If the both supervisor and user password are set, please note the
following.
I
I
I
I
The selection method above does not change the boot priority settings
in HW Setup.
I
If you press a key other than one of those above or if the selected
device is not installed, the system will boot according to the current
setting in HW Setup.
HDD Priority Options
This option lets you set the priority for HDD detection. If the first detected
HDD has a boot command, the system will boot from the HDD.
Built-in HDD1 −>
Built-in HDD2
(Default)
Built-in HDD2 −>
Built-in HDD1
I
If a boot command is not found on the first detected HDD, the system
will not boot from the other HDD. It will search the next device in the
boot priority for a boot command.
I
On those models with only a single drive, this item will not be displayed.
User's Manual
The menu above will appear when you use the user password to
start the computer if the 'Able to run HW Setup' setting is
configured.
The menu above will not appear when you use the user password
to start the computer if the 'Unable to run HW Setup' setting is
configured.
The menu above will appear when you use the supervisor and user
password to start the computer if the 'Able to run HW Setup' setting
is configured.
The menu above will not appear when you use the user password
to start the computer if the 'Unable to run HW Setup' setting is
configured.
The menu above appear when you use the supervisor password to
start the computer even if the 'Unable to run HW Setup' setting is
configured.
The computer will look for the Built-in HDD1 first,
followed by the Built-in HDD2 (Default).
The computer will look for the Built-in HDD2 first,
followed by the Built-in HDD1.
HW Setup
7-4