Using The Remote Control; Parts Identification And Function - Pioneer DEQ-9200 Owner's Manual

Using the Remote Control
When the DSP/MAIN UNIT switch in the
remote controller supplied with head unit
is set to "DSP", some functions of this unit
can be performed with the remote
controller.
* The volume buttons and the attenuator
button operate this unit directly and do
not operate the head unit. (The volume
level of the head unit can be adjusted
with the volume buttons in the head
unit.)
* Some functions of this unit can be
operated with the DSP button.
Fig. 28
Parts Identification and Function
Fig. 29
[23] Volume buttons
Press the (+) side to increase volume and
the (-) side to decrease volume.
[24] DSP button
In the network adjustment mode:
Used to select the filter to be adjusted.
Each time the button is pressed, the
selected filter changes in the sequence of
LOW > MID1 3 MID2 > HIGH > LOW... in
the PRO mode andF > R® SWF... in
the STD mode.
In the equalizer adjustment mode:
Used to recall factory preset equalizer
curve. Each time the button is.pressed, the
selected factory preset equalizer curve
changes in the sequence of ROCK > POPS
> JAZZ > VOCAL > SOFT > FLAT >
ROCK...
In the sound field control mode:
Used to recall the sound filed program.
Each time the button is pressed, the sound
field program changes in the sequence of
STUDIO > JAZZ > HALL > STADIUM >
CLUB > SFC OFF > STUDIO ....
[25] Attenuator button
Press to reduce the volume to 1/10 of its
current setting ( "ATT" is displayed in the
operation display [15].)
Pressing again returns the volume to its
original level.,
* This function is available using the
remote controller unit only.
35