Table of Contents
Advertisement
' PRO]
LOW
Middle/bass
~24 dB —0dB
High-range
-24 dB —6 dB
{1 dB/step)
MID1
MID2
HIGH
STD
-24 dB — 6 dB
sw _[ Saw |
:
ce [ter
-24 dB — 0 dB
-24 dB — 0 dB
(1 dB/step)
8. Press (F1) of buttons [9] to adjust the
slope of filter.
Each time (F1) of buttons [9] is pressed,
the selected slope changes.
ie >-18 Sei
Poo
eed
poe
eee
(geagcres|
frets
A
pons
9. Repeat steps 2, 3 and 8 to adjust the
slope of each
filter.
10.Press (F2) of buttons [9] to adjust the
phase of speaker unit (= filter).
Each press switches the phase between
normal and reverse.
(When the phase is switched to reverse,
"REV" [18] lights in the display.)
*
in STD mode, the phases of the front
speakers (F) and rear speakers (R)
cannot be changed; set only the phase
of the sub-woofer (SW).
.Repeat steps 2, 3 and 10 to change the
phase of each speaker unit (= filter).
12.Press button [11] to quit the network
adjustment mode.
1
—_
21
Advertisement
Table of Contents
