Important Safety Information; Assembly Precautions; Use Precautions - Harbor Freight Tools U.S. GENERAL Junior 56515 Owner's Manual & Safety Instructions

IMPORTANT SAFETY INFORMATION

Assembly Precautions

1. Assemble only according to these instructions.
Improper assembly can create hazards.
2. Tighten Nuts used for assembly securely,
but do not damage the product.
3. Wear ANSI-approved safety goggles during assembly.
4. Keep assembly area clean and well lit.

Use Precautions

1. Do not allow children to climb, stand, or sit on
any part of this item. It can suddenly tip over.
2. Supervise children at all times while
they are playing with this item.
3. Do not allow children to
disassemble the Workbench.
4. Place the Workbench on a solid, level, even
surface before allowing it to be played with.
Page 2 For technical questions, please call 1-888-866-5797.
5. Keep bystanders, including children,
out of the area during assembly.
6. Do not assemble when tired or when under the
influence of alcohol, drugs or medication.
7. Do not allow children to play with this
product until it is completely assembled.
5. Use as intended only. This product is a toy and
should not be used for any other purpose.
6. Inspect before every use. Do not allow use if parts
are not properly secured or parts are damaged.
7. Maintain product labels and nameplates.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
56515