Important Safety Information - Harbor Freight Tools 68752 Instructions And Precautions

Remote control
Table of Contents

Advertisement

This device complies with part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference,
and (2) this device must accept any
interference received, including interference
that may cause undesired operation.
ImpoRtant saFetY
InFoRmatIon
In this manual, on the labeling,
and all other information
provided with this product:
This is the safety alert symbol. It
is used to alert you to potential
personal injury hazards. Obey
all safety messages that follow
this symbol to avoid possible injury or death.
dangeR
dangeR indicates a hazardous
situation which, if not avoided, will
result in death or serious injury.
WaRnIng
WaRnIng indicates a hazardous
situation which, if not avoided, could
result in death or serious injury.
CautIon
CautIon, used with the safety
alert symbol, indicates a hazardous
situation which, if not avoided, could
result in minor or moderate injury.
Notice
notICe is used to address practices
not related to personal injury.
CautIon
CautIon, without the safety alert
symbol, is used to address practices
not related to personal injury.
Page 2
For technical questions, please call 1‑800‑444‑3353.
WaRnIng Read all safety
warnings and instructions.
Failure to follow the warnings
and instructions may result in
serious injury.
save all warnings and instructions
for future reference.
1.
Intended for ages 14 years and
older. Keep out of reach of children
younger than 14 years old.
2.
Intended for indoor use with
direct line of sight from infrared
controller to Helicopter.
3.
Do not touch the moving rotors.
4.
Do not fly towards people or animals.
Keep area clear of bystanders.
5.
Do not expose to rain or wet conditions.
6.
Position batteries in proper polarity and
do not install batteries of different types,
charge levels, or capacities together.
7.
Inspect before every use; do not
use if parts are loose or damaged.
8.
Store idle equipment. When not
in use, store in a dry location to
decrease exposure to moisture. Pack
carefully so rotors are protected
from being bent or broken.
9.
The warnings, precautions, and
instructions discussed in this instruction
manual cannot cover all possible
conditions and situations that may
occur. It must be understood by the
operator that common sense and
caution are factors which cannot
be built into this product, but must
be supplied by the operator.
saVe tHese
InstRuCtIons
SKU 68752

Advertisement

Table of Contents
loading

Table of Contents