Harbor Freight Tools U.S. GENERAL Junior 56515 Owner's Manual & Safety Instructions page 3

Assembly Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document
including all text under subheadings therein before set up or use of this product.
1. Connect the Tray (C) between the two Leg Pairs (B)
at an angle using the Nuts (Q) as shown.
Note that the finished side of each Leg Pair
should be on the outside of the assembly,
and the feet should be pointed downward.
2. Place the Tabletop (A) upside-down on the floor.
Press the top of the Leg Pair assembly into the
rectangular holes in the underside of the Tabletop.
After you are sure all four corners align properly,
press each of them in until you hear a click on
each corner. Confirm that the Leg Pair assembly is
securely attached to the Tabletop at all four corners.
3. Turn the Tabletop and Leg assembly
upright on a stable surface.
56515
Figure A
Figure B
For technical questions, please call 1-888-866-5797.
4. Align the Vise (T) with the four holes on the right end
of the Tabletop. Secure it in place using 4 Bolts (N).
5. Insert the Pegboard (D) securely into the holes on the
Tabletop until both ends click into place. Make sure
that the Pegboard is securely attached on both ends.
T
Figure C
Figure D
Page 3