Advertisement
AUDIO REPRODUCTION
PLAYBACK
OF STEREO
DISCS
When power is turned on, the player goes into stereo
| playback
mode
(the 1/L and 2/L LVP AUDIO
MON-
ITOR
indicators
both
light), and
disc
playback
is
performed in this mode.
lf either of the 1/L or 2/R indicators is off, press the
AUDIO
STEREO
key on the remote
control
unit to
make both indicators light.
The sound played back via a TV set connected to the
VHF output terminal, is not stereo even if a stereo disc
is played.
PLAYBACK
OF BILINGUAL
DISCS
To listen to only one channel of a bilingual disc etc.,
press either the 1/L or 2/R AUDIO key corresponding
to the channel you wish to hear. The indicator of the
channel which. is selected
will remain
lit, while the
indicator for the other channel will go out.
Sound is only output during normal playback.
Sound
is not output during still, scan, or multi-speed
play-
back modes.
SOUND SELECTION WITH THE AUDIO KEY
(Selection is only possible for analog sound.)
Audio Output
AUDIO
Keys Sa
Indicators on
Player
STEREO | Mixture of
1/L and 2/R
DIO MONITOR
—
see
oaaR-
—LVP
AUDIO
MGMEgGEg, —
-1o
2
When digital sound is output from the CD/LV audio output
terminals, selection.with the AUDIO
keys is not possible.
Selection
is only possible for sound output from the LV
ANALOG)
audio output terminals.)
The sound output from the VHF output terminal is analog
sound.
PLAYBACK
OF DISCS WITH THE (ks MARK
Discs with the (CRM mark, are played with the CX
SYSTEM
indicator on the front panel lit.
(Refer to
page 20 "CX SYSTEM".)
PLAYBACK
OF DIGITAL SOUND
DISCS
When
LaserVision
with
Digital
Sound
Discs
are
played back with the AUTO DIGITAL indicator on the
front panel lit, digitally recorded sound is output from
the CD/LV
audio output terminals.
[When power is turned on, the AUTO DIGITAL
indicator is on (lit up).]
At this time the [DIGITAL] indicator lights to show
that digital sound is being output.
When
the AUTO
DIGITAL
indicator
is not lit, the
output
from
the
CD/LV
audio
output
terminals
is
analog sound.
When digital sound is being output from the CD/LV
audio output terminals, sound
channel
selection
using the AUDIO keys is not possible (the output is
always stereo mode).
During disc playback, the sound output from the LV
(ANALOG)
audio output terminals, is always analog
sound.
PLAYER INDICATOR DISPLAYS AND OUTPUT
OF SOUND FROM THE AUDIO OUTPUT
TERMINALS
Indicators on Player
Output Sound
AUTO DIGITAL
CD/LV
{LV
(Automatically Terminals (ANALOG
=
lights}
Terminals
ut_|Dioital |
—
Lit
it
FOR BILINGUAL DIGITAL SOUND DISCS
Digital sound is always output through both 1/L and 2/R
(STEREO mode).
The audio channel cannot be switched over by remote control
key operation.
After pressing the LVP AUDIO button on the front panel, the
AUTO DIGITAL indicator will go out. After switching over to
analog sound, select the audio by channel the remote control
unit's audio monitor keys.
Discs with the
Seid mark
Always
outputs
analog
sound
Discs without
the
ia mark
19
<VRB1001>
5
3 e
i :
ARRIETA
RONEN
TST
ee
a SOS
eS
Te
EE
SEES
SS
EG SESE
EER
ES SRE TE TB
EE
SS
OBS
TEE
TSE
LIT
ET
TT
SL
A I SET
TTT IE
Advertisement
